Table of Contents
Advertisement
continued
The selected channel will appear on
the screen.
2) Press 2 +/– to select the new
program number position for your
selected channel, then press t.
3) Repeat steps b) 1) and 2) if you wish
to change the order of the other
channels.
c) Press MENU to go to the next menu.
4
Press 2 +/– to adjust the bars on the
top and bottom of the menu if they are
slanted, then press t (KV-HA212M53/
HA212M50 only).
If no adjustment is necessary, then press t.
5
Press 2 +/– to select "No", then press t.
This menu will not appear again the next
time you turn on the TV by pressing !.
To allow this menu to appear again, select
"Yes", then press t.
Tips
• You can immediately go to the end of the "Initial Setup" menu by pressing MENU.
• You can also set up your TV by using the menu system (see page 13) or by pressing the MENU
button on the TV front panel for about five seconds to reset your TV to the factory settings.
8
Installation
01
01
02
03
04
Advertisement
Table of Contents
