Unpacking And Installation Although it is neither complicated to install nor difficult to operate your Power Amplifier, a few minutes of your time is required to read manual for a properly wired installation and becoming familiar with its many features and how to use them. Please take a great care in unpacking your Power Amplifier and do not discard the carton and other packing materials.
Features 6CD Changer. 6CD player auto changer magazine type mechanism 4 times oversampling digital filter. Using the laser of 3 beam type and 1 bit stream D/A converting system. Programmable random repeat play function. Using oil damper for vibration proof system. Remark - Please loosen a screw on the bottom and attach a hole sticker before installing this unit.
Front Panel Controls 1. POWER SWITCH Press this switch to ON will make the power indication LED ON and supply the power to this unit and press again turn the power off. 2. VOLUME CONTROLLER This control is used for adjusting the volume. 3.
This is the AC INPUT for the AC INPUT CORD. 2. FUSE HOLDER This fuse holder contains the AC fuse. If blown, replace it with same type fuse as specified below. If the fuse continuously blows, refer servicing to qualified personnel. MODEL ECD-2602 VOLTAGE AC220V FUSE RATING F0.5AL 250V 3.
How to Use CD Magazine HOW TO USE CD MAGAZINE 1.Pull out A part 5.Insert CD magazine with your hand in the CD mechanism. 6.Press the eject 2.Insert CD button to pull out on the slot. the CD magazine. 7.Close the slid door 3.Push the slot.
Need help?
Do you have a question about the ECD-2602 and is the answer not in the manual?
Questions and answers