Advertisement
Quick Links
Advertisement
Summary of Contents for Hanlon 56836
- Page 1 BOUTIQUE-KITCHEN RACK V1 MODEL # 56836 Instruction Manual...
- Page 3 TABLE OF CONTENTS TECHNICAL SPECIFICATIONS SAFETY PARTS LIST ASSEMBLY OPTIONS SAVE THESE INSTRUCTIONS This manual contains important safety and assembly instructions. Read all instructions and follow them with use of this product.
-
Page 4: Technical Specifications
56836 TECHNICAL SPECIFICATIONS TOTAL CAPACITY 700 lb (317.5 kg) CAPACITY PER SHELF 350 lb (158.7 kg) HEIGHT 37.75" (95.3 cm) WIDTH 27.5" (69.9 cm) DEPTH 14" (35.6 cm) SHELF WIDTH 24.25" (61.6 cm) - Page 5 GENERAL SAFETY • Keep work area clean and dry. • Use correct/recommended tools for the job. • Never leave tools unattended. • Never force a part into place. • Never crawl, climb, sit, or stand on a rack. • Keep small parts away from children. Never leave a small child unattended while assembling. •...
- Page 6 56836 Description Description Vertical Beam Woodgrain Deck Horizontal Beam Carriage Bolt Diagonal Beam 10 mm Nut Crossbeam Locking Shelf Pin Stacking Bracket Shelf Strap Wall Mount Bracket Assembly Wrench BEFORE YOU BEGIN: • Read all instructions thoroughly. •...
- Page 7 Tools Required for Rack Assembly: Wrench (included), Rubber Mallet (not included)
- Page 8 56836 UPRIGHT FRAME INSTRUCTIONS STEP 1 • Place two vertical beams on the floor, parallel to one another and about 14" (35.6 cm) apart. The widest part of the teardrop-shaped hole pattern on each beam should be facing away from you.
- Page 9 CROSSBEAM AND SHELF STRAP INSTRUCTIONS Note: It is recommended for one person to hold the upright frames in place while a second person installs the crossbeams. STEP 1 • There is a set of locking tabs at both ends of every crossbeam. To begin assembly, take one crossbeam and insert the tabs into two of the holes on the lower portion of one upright frame.
- Page 10 56836 CROSSBEAM AND SHELF STRAP INSTRUCTIONS STEP 4 • Continue assembly by installing the top set of crossbeams to the upright frames. Make sure the crossbeams are attached at the same level on both sides. If you plan to stack two Kitchen Racks together, then DO NOT attach the top set of crossbeams to the very top of the upright frames.
- Page 11 WALL MOUNTING INSTRUCTIONS Note: Drywall anchors and anchor screws are included with this rack; however, different wall materials require different types of fasteners. Use fasteners suitable for the walls in your home. If you are uncertain about what type of fasteners to use, then please contact your local hardware store.
- Page 12 56836 WOODGRAIN DECK AND LOCKING SHELF PIN INSTRUCTIONS STEP 1 • Place the first deck onto the top ridge of the crossbeams. If seated properly, the deck will “pop” into place and lay evenly. Repeat for the remaining decks.
- Page 13 STACKING INSTRUCTIONS Note: Every Kitchen Rack comes with two (2) stacking brackets. In order to safely stack two of these racks together, you MUST use four (4) brackets. It is recommended that one person holds the upright frames in place while TOP RACK a second person installs the stacking brackets.
- Page 14 56836 MULTIPLE CONFIGURATIONS NOTE: Connect multiple racks together to increase both length and height. *Additional racks are sold separately.
- Page 16 LIMITED WARRANTY ™ J.HANLON Storage Racks are backed by a One Year Warranty through JS Products. This warranty covers manufacturer defects and workmanship. The warranty excludes misuse or abuse and normal wear and tear. JS PRODUCTS | 6445 MONTESSOURI STREET | LAS VEGAS, NV 89113...