Advertisement
Quick Links
Advertisement
Summary of Contents for JP EnErG ExplorAir
- Page 1 User Manual ExplorAir Magic Air...
- Page 3 WARNING DO NOT USE THIS PRODUCT UNLESS YOU HAVE READ AND UNDERSTAND THESE WARNINGS AND INSTRUCTIONS WHICH ARE FOR YOUR SAFETY AND PROTECTION. THIS INFORMATION MAY BE SUBJECT TO CHANGE AT ANY TIME. PLEASE VISIT OUR WEBSITE AT: www.jp- australia.com FOR CURRENT UPDATES. IF YOU ARE BELOW THE AGE OF 18, YOU SHOULD HAVE YOUR PARENT OR GUARDIAN READ THESE WARNINGS AND INSTRUCTIONS AND SHOULD NOT USE THIS PRODUCT UNLESS YOU ARE UNDER THE PROPER GUIDANCE AND SUPERVISION OF SUCH A PERSON.
- Page 4 • Keep these instructions for future reference. Features Model Actual volume Capacity Name (kg) MagicAir 150 D-Ring Valve ExplorAir 200 Stringer Stringer Fin 10” + screw + plate Mast plug Center fin box (As an accessorie part for MagicAir) EVA Pad...
- Page 5 Instructions to inflate your board: - Carefully roll out - Connect the the board pump hose to the valve, insert and rotate it to the right - Pull the valve pin counter-clockwise and up - Pump your board to 15 psi (1 bar) - Turn from double...
- Page 6 Fin Ride 44 Fin Ride 44 Center fin (Only comes with ExplorAir) Inserting the fins: - Insert the into finbox, minding - Insert the correct plate into the position. finbox - Push the plate towards the front edge of the finbox...
- Page 7 Inserting the footstraps: - Position footstrap next to D-Ring - Take the two inside - Open footstrap parts and put them thru and remove EVA cover the D-Rings (left side closed/right side open) - Place the left inside part into the inside of the right part and close it - Put the EVA cover around the inside parts and close the footstrap (adjust the size of the inside parts if needed)
- Page 8 Deflating the board: Whenever you take your board out of the water and deflate it, allow time for it to air out and dry. Neither the skin/hull nor the inside chambers will suffer from water damage, but stagnant water could cause mildew and foul odor. HOW TO REPAIR SMALL PUNCTURES Push the valve pin...
- Page 9 How to attach accessory Center fin box (Magic Air): Items included: • US fin box • PVC patch • Fin 10” • Glue - Attach the finbox and the PVC patch onto the marked area on the board – following the instructions on the adhesive tube.
- Page 10 JP-AUSTRALIA – LIMITED WARRANTY Every JP-Australia product is subjected to rigid pre-sales quality control tests and is backed by our comprehensive warranty policy below. JP-Australia warrants that this product, when it is purchased from an authorized JP-Australia dealer by a retail customer, will be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original retail customer.
- Page 12 Photos: Marko Butrakovic / Robby Swift...
Need help?
Do you have a question about the ExplorAir and is the answer not in the manual?
Questions and answers