Table of Contents
Advertisement
USING THE PROJECTOR
Menu navigation and features
The projector has multilingual on-screen display menus that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect the source.
1.
To open the OSD menu, press Menu on the remote control or
2.
When OSD is displayed, use
on a particular page, press
3.
Use
settings. Adjust the settings by using
4.
Select the next item to be adjusted in the sub menu and adjust as described above.
5.
Press the
6.
To exit, press the
the new settings.
Main Menu
24
English
keys to select any item in the main menu. While making a selection
or
keys to select the desired item in the sub menu and then press
to confirm, and the screen will return to the main menu.
or
or
again. The OSD menu will close and the projector will automatically save
Image Settings
Aspect Ratio
Edge Mask
Digital Zoom
Image Shift
Select
key to enter sub menu.
keys.
Sub Menu
Display
Exit
Navigation guide
on the projector keypad.
or
key to view further
Settings
Enter
Advertisement
Table of Contents
