Download Print this page

Doogee P1 User Manual

1. When connecting the remote control, please make sure that the mobile phone connected to the AP

hotspot of the projector, or the phone and projector connected in the same LAN.

2. The QR code will come out whenever short press the power button for twice.

3. After open the remote APP, if there is connection records, click any keys, it will be automatically

connected to the projector which is the most recent connection.

1.1 Long press the power button to turn on the projector, enter the QR code interface.

Note: The hotspot name and password is below the QR code.

User Manual

AP hotspot and password

Table of Contents

Do you have a question about the P1 and is the answer not in the manual?

Page 1: User Manual
User Manual Special instruction: 1. When connecting the remote control, please make sure that the mobile phone connected to the AP hotspot of the projector, or the phone and projector connected in the same LAN. 2. The QR code will come out whenever short press the power button for twice. 3.
Page 2 1.2. Open the remote control APP, click on the upper right corner, the phone will automatically enter scan page, scan the QR code to connect the device. 2. Connect WiFi for projector 2.1 Please make sure the remote control is connected to the projector. 2.2 Click , it comes out the WiFi list, choose the WiFi you need and enter the password, then you can connect WiFi for the projector.
Page 3 ...
Page 4 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no gua rantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct. ...