Advertisement
Poseidon 3266 THset – starting guide
Poseidon 3266 THset
Starting Guide - Poseidon 3266 THset
First steps with temperature, humidity and open door measuring
Poseidon 3266 THset package contains:
Poseidon model 3266 [600 252]
•
Poseidon T-Box2 [600 280]
•
Temperature probe Temp-1Wire 3m
•
[600 005]
Humidity probe Humid-1Wire 3m
•
[600 279]
Door contact [600 119]
•
Power adapter 12V [600 080]
•
„Starting Guide", CD with documentation, manual and Software
•
1) Connecting of Poseidon 3266 THset
1.1) Check DIP switch. Installation position has to be same like in
the picture (DIP1=Off, DIP2=Off).
1.2) Four inputs are designed for the contact connecting.
Connect the door sensor – part of the start set.
1.3) Connect the power adapter to power socket (230 /
110V) and connect it to Poseidon power connector.
1.5) Connect the cable of T-Box2 switch into SENSORS
(RJ12) connector, the connector must click.
1.6) Connect Poseidon to Ethernet (direct cable
to Switch, crossed to PC)
2) IP address configuration - UDP Config
UDP Config start-up file is located in root of supplied CD; latest version can be found on our web:
www.HW-group.com, follow Poseidon 3266 link.
www.HW-group.com
1.4) Connect temperature and
humidity sensors to T-Box2
switch.
HW group
600 282
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HW Group Poseidon 3266 THset
Summary of Contents for HW Group Poseidon 3266 THset
- Page 1 Poseidon 3266 THset – starting guide HW group Poseidon 3266 THset Starting Guide - Poseidon 3266 THset First steps with temperature, humidity and open door measuring Poseidon 3266 THset package contains: Poseidon model 3266 [600 252] • Poseidon T-Box2 [600 280] •...
- Page 2 Poseidon 3266 THset – starting guide HW group Click the icon to run UDP Config • program – it will automatically search for connected devices In case the device was not connected to network during UDP Config start-up, you can easily click the Find Devices button to repeat the search again.
- Page 3 Poseidon 3266 THset – starting guide HW group 3.2) WWW page Poseidon 3266 Input number for Input value while Alarm definition for Device IP address connect the contact WWW is loaded every input Value out of safe Unique sensor ID...
- Page 4 Poseidon 3266 THset – starting guide HW group 4) Flash Setup configuration After the click „Flash Setup“ link from WWW page, the graphic configuration version in browser is opened. Macromedia Flash player in web browser must be installed. If you don´t have it, you can download his last version from Internet or find it on CD: \Poseidon\install_flash_player_7.msi...
Need help?
Do you have a question about the Poseidon 3266 THset and is the answer not in the manual?
Questions and answers