Page 1: Table Of Contents
- Schedule - Definition Camera - Installation Method Selection Input - Software Selection Output 3. Remote Client Installation - Network - Using MagicRadar S/W DVR Server - Using the Web Browser Web Sever Central Station 4.Uninstallation E-mail 5.Program Execution Dial Alarm...
Page 2: Appendix
/ www.MagicRadar.com View Log Application (Status) 71 Appendix 1 POS DVR 1. Screen Features 1. Hardware Installation - Event Log - Parts - Installation 2. Software Installation - Installation & Setup Playback Application (Search) 75 1. Search Features 1 2.
Page 3 Digital Video Surveillance System - MagicRadar...
Page 4: Hardware Installation
Chaper 1 Hardware Installation > Product Specification > DVR Cards & Accessories > Installation...
Page 5: Product Specification
1. Product Specification Models T04 / TS04 / CS04 / CS08 / CD08 / CS16 / CD16 / LS16 / LD16 30fps(NTSC), 25fps(PAL)/ 60, 50/120, 100/120, 100/240, Displaying Speed 200/120, 100/240, 200/480, 400/480, 400 30fps(NTSC), 25fps(PAL)/60, 50/120, 100/120, 100/240, Recording Speed...
Page 6: Dvr Cards & Accessories
2. DVR Cards & Accessories (1) T04 / TS04 a. Capture Card b. DIO Board c. Cables: DIO Cable Reset Cable SYSTEM REQUIREMENTS CPU: Intel Celeron 1GHz (minimum) Mother Board: Intel Chipset (845D/PE, 850B/D, 865G/PE) Memory: 256MB HDD: 80GB VGA: ATI Card (32MB)
Page 7: Ls16
(3) CS08 & CS16 Video Cable DIO Cable Reset Cable a. Capture Card b. DIO Board c. Cables SYSTEM REQUIREMENTS CPU: Intel Celeron 1.7GHz (minimum) Mother Board: Intel Chipset (845D/PE, 850B/D, 865G/PE) Memory: 256MB HDD: 80GB VGA: ATI Card (32MB) O/S: Windows 2000, Windows XP, Linux (4) LS16 Video Cable...
Page 8: Ld16
DIO Board c. Cables SYSTEM REQUIREMENTS CPU: Intel Pentium4 2.4GHz (minimum) Mother Board: Intel Chipset (845D/PE, 850B/D, 865G/PE) Memory: 256MB R-DRAM HDD: 80GB VGA: ATI RADEON 7000 (VIP Port) (32MB) O/S: Windows 2000, Windows XP [ MagicRadar ] User’s Manual...
Page 9: Installation
3. Installation (1) T04 >> 30fps/30fps (NTSC), 25fps/25fps (PAL) A. Camera Inputs B. TV-out C. DIO Cable Connector D. Reset Connector Connect one end of Watchdog cable to “D” and the other end to the reset switch on the mother board of MagicRadar System.
Page 10 What is Watchdog? Watchdog is a function that keeps MagicRadar alive at all times. In other words, Watchdog will automatically reboot PC if it becomes unstable or shows abnormal status (i.e. abnormal shutdown, Windows error, etc.) [ MagicRadar ] User’s Manual...
Page 11: Ts04
(2) TS04 >> 60fps/60fps (NTSC), 50fps/50fps (PAL) DIO Board (Side) DIO Board (Front) A. Camera Inputs D. Reset Connector F. Control utputs B. TV-out E1.Sensor Inputs ( only) G. Audio Inputs C. DIO Cable Connector E2.Sensor Input ( only) For details, refer to page 10 & 11. Tibetsystem Co.,Ltd.
Page 12 [ MagicRadar ] User’s Manual...
Page 13: Cs04
(3) CS04 >> 120fps/120fps (NTSC), 100fps/100fps (PAL) Audio Board DIO Board A. Camera Inputs D. Reset Connector G1. Sensor Inputs ( only) B. Audio Cable Connector E. Audio Inputs G2.Sensor Input ( only) C. DIO Cable Connector F. TV-out H. Control Outputs For details, refer to page 10 &...
Page 14 [ MagicRadar ] User’s Manual...
Page 15 Video on DIO Board. Audio: 4 audio channels. Monitor Out: 1 monitor out. Reset Connector: Connect one end of Watchdog cable to reset connector and the other end to the reset switch on the mother board of MagicRadar System. Tibetsystem Co.,Ltd.
Page 16 [ MagicRadar ] User’s Manual...
Page 17: Ls16
SVHS: 1 SVHS output Reset Connector: Connect one end of Watchdog cable to reset connector and the other end to the reset switch on the mother board of MagicRadar System. A: FPGA chip (NTSC or PAL) VGA Connector: Connect one end of VGA cable to the VGA Connector on Capture Board and the other end to the VIP port on VGA card.
Page 18 [ MagicRadar ] User’s Manual...
Page 19 SYNC: Not in use Audio: 8 audio channels Monitor Out: 2 monitor outs. Reset Connector: Connect one end of Watchdog cable to the reset connector and the other end to the reset switch on the mother board of MagicRadar System. Tibetsystem Co.,Ltd.
Page 20 [ MagicRadar ] User’s Manual...
Page 21: Ld16
Reset Connector: Connect one end of Watchdog cable to reset connector and the other end to the reset switch on the mother board of MagicRadar System. VGA Connector: Connect one end of VGA cable to the VGA Connector on Master Board and the other end to the VIP port on VGA card.
Page 22 [ MagicRadar ] User’s Manual...
Page 23 Digital Video Surveillance System - MagicRadar...
Page 24: Software Installation
Chaper 2 Software Installation > Automatic Installation > Manual Installation > Remote Client Installation > Uninstallation > Program Execution...
Page 25 Steps: 1. Insert MagicRadar S/W. 2. Double-click “magicradar(4.0.0.0).exe”. Tibetsystem Co.,Ltd.
Page 26: Automatic Installation
1. Automatic Installation (1) Definition It is a method to install all the relevant softwares automatically. Select “Automatic Installation” at all times unless only “MagicRadar Client” is to be installed. (2) Installation Method Selection (3) Installing Drivers [ MagicRadar ] User’s Manual...
Page 27: Dvr File System Installation
(4) DVR File System Installation Definition: Occupying disk capacity to record data Steps: 1. Select drives from “Available Disk Drive Capacity” 2. Click “Add”. 3. Click “Initialization”. Caution: 1. Be very careful not to add “C Drive”, for it is used for O/S and the DVR softwares. 2.
Page 28: Completion & Retry
Initialization process will be performed automatically. Click “Close” upon completion. (5) Completion & Retry Retry the entire procedure if an error message is displayed. [ MagicRadar ] User’s Manual...
Page 29: Manual Installation
2. Manual Installation (1) Definition It is a method to install selected softwares manually. Select “Manual Installation” only in the case of “MagicRadar Client” installation. (2) Installation Method Selection (3) Software Selection Note: The rest of the procedures are the same as “Automatic installation”.
Page 30: Remote Client Installation
3. Remote Client Installation (1) Using MagicRadar S/W Double click “magicradar(4.0.0.0), exe”. Select “Manual Installation”. Select “MagicRadar DVR Client” only. [ MagicRadar ] User’s Manual...
Page 31: Using The Web Browser
(2) Using Web Browser 1. Type in the IP address of DVR server. 2. Log in first before downloading Remote Client Program. Tibetsystem Co.,Ltd.
Page 32 3. Click the “Install Remote Client” button for downloading. 4. Downloading in progress [ MagicRadar ] User’s Manual...
Page 33 5. Click “Next” to proceed. 6. Select “Manual Installation”. 7. Click “Next” to finish Installation process. Tibetsystem Co.,Ltd.
Page 34: Uninstallation
4. Uninstallation 5. Program Execution Find the icons on the desktop to execute “MagicRadar DVR” and “MagicRadar DVR Client”. Or find “MagicRadar DVR” under “All Programs”. [ MagicRadar ] User’s Manual...
Page 35 Digital Video Surveillance System - MagicRadar...
Page 36: Main System Application
Chaper 3 Main System Application > Startup Screen > Login > Exit / Logout > Control Screen > Setup (System/Device/Event/Schedule/Network/User)
Page 37: Startup Screen
The default values for User and Password are “admin” and “no password”. Click “OK” to execute MagicRadar DVR system. To give “admin” a password and to create new users, certain configurations are required(Setup/User). Only “admin” and users with appropriate authorization have access to the Setup menu.
Page 38: Exit/Logout
3. Exit/Logout To end MagicRadar DVR system, select “Exit” and type in password. 4. Control Screen Network Setup Date / Time User Mode Model Adjust PTZ Adjustment Preset Touring Light E-map I-Phone PTZ Control Camera Layout Panel Volume Power Camera Selection...
Page 39: Setup
5. Setup (1) System System Information Create a DVR name and put in admin. info. They will be displayed on outgoing e-mails. Tibetsystem Co.,Ltd.
Page 40: System Power Management
Camera1 10 sec. Camera2 10 sec. Camera3 . E-map Click on the “E-map” button to design E-map. Click on “Open Map Image” to select an E-map image. [ MagicRadar ] User’s Manual...
Page 41 The above is a designed E-map sample. Drag mouse to position Camera/Input/Output and design E-map. Tibetsystem Co.,Ltd.
Page 42: Tv-Out
White Camera : Not on Recording, Yellow Camera: On Recording, White Input/White Output : Not Activated, Yellow Input/Yellow Output: Activated TV-OUT TV-OUT is a function that sends selected cameras to a call monitor (external analog monitor). Click on the “TV-OUT” button for setup. [ MagicRadar ] User’s Manual...
Page 43: On-Screen Display
“M” (Setup/Schedule). Text Inserter Text Inserter is a function that allows MagicRadar DVR system to integrate with POS machines. Simply install “text_inserter_plugin_for_ pos” on DVR Server, and transactions that occur will be displayed on selected camera pictures. Transaction recording and text search are possible as well.
Page 44: Hard Disk Usage
For more detailed Timeout: I-phone setup, refer to Appendix 2. It indicates the maximum length of connection trial. If there is no response within the value set, call will be cancelled. [ MagicRadar ] User’s Manual...
Page 45: Version Info
Version Info. Version 4.0.0.0: version name Built 2004. 11. 26: built date Maintenance Log It is used to record and view maintenance history. (2) Device Device sub-screen is divided into 5 different setup categories; Camera, Output, Input, Audio and Alert. All devices in each category can be set up on one same page.
Page 46: Camera
Double-click on “Camera” for more individual Camera setup. Select recording picture quality. Pre-alarm (max. 10 sec.): Length of time to be recorded before event Post-alarm (max. 60 sec.): Length of time to be recorded after event [ MagicRadar ] User’s Manual...
Page 47 [Motion Detection] MagicRadar DVR system is designed to have unlimited motion detection zones and to have different motion detection sensitivity levels. Zone Settings: 1. Select “Set”, drag mouse to set motion detection zones and click “OK”. 2. Select “Clear” to clear certain areas inside motion detection zones.
Page 48 6. Go to the “Control Screen” and find the red-squared “Object Detection” symbol. 7. One click on the “View Original Frame” button will display original image set. 8. Click it again to reactivate the “Set Frame” button. [ MagicRadar ] User’s Manual...
Page 49 [People Counter] It is a function that counts people coming in and out of a certain place. How to Set up: 1. Click on the “People Count” button. 2. Tick the “Use People Count” box. 3. Set “Count Interval”. 4. Go to “Zone Settings” and set “People Counting Zone”. 5.
Page 50 [PTZ Camera Setup] When using a PTZ camera, check the box and select a model name. MagicRadar DVR system supports nearly 40 different protocols. Camera ID: Leave it as it is if only one PTZ camera is used.
Page 51 [Preset & Touring] Either click the right mouse on camera picture or click on the Preset (Touring) button for Preset (Touring) setup and use. [Preset] “Preset” is a function that enables a camera to move from one position to another automatically. Tibetsystem Co.,Ltd.
Page 52 2. Click the right mouse. 3. Name the preset. 4. Repeat the above for setting up as many as 256 presets. 5. Click the right mouse to run preset and click the “Auto” button to stop it. [ MagicRadar ] User’s Manual...
Page 53 [Touring] “Touring” is a function that enables a group of selected presets to work repeatedly. Steps to Set up a Tour: 1. Click the right mouse. 5. Click “OK”. 2. Name the tour. 6. Repeat the above to have more than 3.
Page 54 [ MagicRadar ] User’s Manual...
Page 55: Output Device
Output Device MagicRadar DVR system can be equipped with as many as 8 output devices. Simply check the boxes for use. In addition, outputs can be manually activated from Control screen (Manual Alarm). Double-click on “Output” for individual output setup.
Page 56: Input Device
16 input devices. Simply check the boxes for use. Each and every input can be tuned independently. Signal Types: NO: (+) & (-) detached normally NC: (+) & (-) attached normally [ MagicRadar ] User’s Manual...
Page 57: Audio
Audio MagicRadar DVR system is equipped with as many as 8 audio channels. Simply connect cameras to audio channels for use, and audio recording will be completed as chosen. (e.g.) The above selections indicate that Audio2 will record Camera3, Audio3 will record Camera5, etc.
Page 58: Alert
1 alert device. Alert is the beep inside the system that sounds in the case of event. Check the box for use. Length of Activation: The length of alert activation (1-60 sec.). [ MagicRadar ] User’s Manual...
Page 59: Event
(3) Event “Event” consists of 3 different groups; “Input”, “Motion Detection” and “No Video Signal”. On this menu, devices can be set to respond to different events. Input Length of Full Screen Display: The time length for full screen display in the case of input device activation.
Page 60: Motion Detection
Motion Detection The same identical concepts and methods as “Input” are applied to the “Motion Detection”. [ MagicRadar ] User’s Manual...
Page 61: No Video Signal
No Video Signal The same identical concepts and methods as “Input” are applied to “No Video Signal”. The above example shows that Camera2 will take over and record if there is a signal cut in Camera1. (4) Schedule “Schedule” is a place where the different activities of different devices are determined. Camera Each camera can have different recording options;...
Page 62 Manual (Instant) Recording It is a function that enables users to react on an emergency situation properly by making MagicRadar start recording immediately. Start “Manual Recording” by selecting “Recording On”. Stop “Manual Recording” by selecting “Recording Off”.
Page 63: Input
Input Output Tibetsystem Co.,Ltd.
Page 64: Network
Timeout: The time length of trials to connect to DVR Server from Client Maximum Users: The maximum number of users that can be logged in remotely. Details: It shows all the port numbers that are available to use. [ MagicRadar ] User’s Manual...
Page 65: Web Sever
Transmitted Video Quality: Video quality to be transmitted to Client. As a reminder, the higher video quality gets, the slower network transmission speed becomes. Therefore, it is often recommended to select low video quality when using “Narrowband”. Bandwidth: Make sure to select the right bandwidth to have the right network performance.
Page 66: E-Mail
Choose events to report to Central Station server and set reporting time period. E-mail E-mail is a function that enables MagicRadar DVR system to send out e-mails when selected events occur. Check the box and click on “Properties” for setup.
Page 67: Dial Alarm
Dial Alarm “Dial Alarm” is a function that enables MagicRadar DVR system to call out on selected events. Check the box and click on “Properties” for setup. Modem card must be installed inside MagicRadar DVR system to make this function work. Type in phone (mobile) number to report.
Page 68 Only ONE user with “Admin Mode” can log in remotely. Network: If checked, remote access authorization will be given. Multi-access: If checked, multi-users with the same user name can log in remotely at the same time. [ MagicRadar ] User’s Manual...
Page 69 Digital Video Surveillance System - MagicRadar...
Page 70: View Log Application (Status)
Chaper 4 View Log Application > Screen Features - Event Log...
Page 71: Screen Features
1. Screen Features Recording Camera: It shows recording status. Sensor Detection: It shows sensor detection status. Motion Detection: It shows motion detection status. Alarm: It shows alarm activation status. HDD Capacity: It shows HDD capacity used for recording. Event: It shows events occurred. Event Log: It shows all the previous events occurred by date.
Page 72: Event Log
List: All events for a certain selected date will be shown. Delete All: If clicked, all the previous records will be deleted. Delete: If clicked, only the events for a certain selected date will be deleted. Refresh: If clicked, events will be updated. [ MagicRadar ] User’s Manual...
Page 73 Digital Video Surveillance System - MagicRadar...
Page 74: Playback Application (Search)
Chaper 5 Playback Application > Search Features 1 > Search Features 2 - Playback - Event / Object / Text Search - Bookmark & Go To - Save - Print - Backup...
Page 75: Playback
1. Search Features 1 Calendar: All dates with recorded data will be marked in bold numbers. Blur/Sharp/Normal: Buttons to adjust sharpness of image Zoom: Buttons to zoom in/out Brightness: buttons to adjust brightness Contrast: buttons to adjust contrast Default: Default for Zoom/Brightness/Contrast 2.
Page 76: Event / Object / Text Search
Click the Event / Object / Text Search button and select “Event”. Select channels for Event Search. Select one event from the event list and click “OK”, and the selected event will be displayed. Click “Refresh” to update the list. [ MagicRadar ] User’s Manual...
Page 77 [Object Search] Object Search is only to search certain selected objects for a certain period of time. Scan: Set the time period for object search. Motion Detection Zone: Select “Set” and mark areas by dragging mouse. “Clear” is used to erase certain areas inside motion detection zones. Sensitivity: It means “Motion Detection Sensitivity”.
Page 78 It is to search POS text data with image according to selected time period and item. Put in an item(Reference), select time period and click on “Search”, and a list with transactions will be displayed. [ MagicRadar ] User’s Manual...
Page 79: Monitoring & Searching
(3) Monitoring & Searching It is a feature that enables user to view live video while searching recorded data. Click the right mouse and select “Monitoring On” to view live video. Click the right mouse again and select “Monitoring Off” to go back to “Search Mode”. Tibetsystem Co.,Ltd.
Page 80: Bookmark & Go To
BMP: For saving images. Watermarked images can be saved. JPEG: For saving regular still images. Quality is not as good as BMP but less HDD is used. Save in JPEG with Time Period: For scheduled save in JPEG [ MagicRadar ] User’s Manual...
Page 81 [Save in AVI Format] Click “Start” to start saving and “Stop” to stop saving. Mute: Saving video only (no audio) High Speed: Saving in high speed Tibetsystem Co.,Ltd.
Page 82 Click “Start” and select “BMP” as you save images. [Save in BMP Format] Saved images can be checked using “Watermark Proofer”. [Watermark Proofer] Execute Watermark Proofer and check if certain saved images are forged or not. [ MagicRadar ] User’s Manual...
Page 83 [Save in JPEG Format] Click “Start” and select “JPEG” as you save images. Tibetsystem Co.,Ltd.
Page 84: Print
[Save in JPEG with Time Period] Select time period and select channels to be saved in JPEG. (6) Print Click the “Print” button and follow the same printing procedure as you would normally print out documents. [ MagicRadar ] User’s Manual...
Page 85: Backup
(7) Backup Back up recorded data using various backup devices. If password is set, viewing backup data will be possible only when it is typed in. Tibetsystem Co.,Ltd.
Page 86 [ MagicRadar ] User’s Manual...
Page 87 Digital Video Surveillance System - MagicRadar...
Page 88: Remote Monitoring System (Client)
Chaper 6 Remote Monitoring System > Program Execution...
Page 89: Program Execution
1. Program Execution Double-click on the “MagicRadar DVR Client” icon on the desktop to execute Remote Monitoring System (Client). Note: Make sure to put the same Port No. as DVR server. Tibetsystem Co.,Ltd.
Page 90 Select one from “Servers”, click on “Login” and type in password to log in. Edit: Login info. changes can be made here. Delete: Registered servers can be deleted with one click. Full Screen Display on Event: If checked, full screen will be displayed on events. [ MagicRadar ] User’s Manual...
Page 91 Digital Video Surveillance System - MagicRadar...
Page 92: Appendix 1 Pos Dvr
Appendix POS DVR > Hardware Installation > Software Installation I-phone > Installation > Execution > Audio Setup DVR Manager > Installation > Execution...
Page 93: Hardware Installation
1-1. Hardware Installation (1) Parts a. RS232 Serial Cables (Cross & Direct) b. RS232 Serial Cable c. RS232 Serial Cable d. RS232 Serial Converter (9 pins into 25 pins) e. Gender Changer Tibetsystem Co.,Ltd.
Page 94 + d + e g. DVR h. POS Printer i. Point of Sales (POS) [ MagicRadar ] User’s Manual...
Page 95: Installation
(2) Installation “b” goes into the COM Port 1 of “g”. “a” goes into the serial port of “h”. “c” goes into the serial port of “i”. Tibetsystem Co.,Ltd.
Page 96: Software Installation
1-2. Software Installation (1) Installation & Setup Install “text_inserter_plugin_for_pos” on DVR Server. Click “Next” to start. [ MagicRadar ] User’s Manual...
Page 97 Select “Typical Installation” for automatic installation. Select camera channels and click the com port buttons for serial port configuration. Make sure to select “COM1” if POS printer is connected to com port 1. The Baud rate value is normally 9600. Tibetsystem Co.,Ltd.
Page 98: Finish
Click “Finish” to complete. Go to “Text Inserter” in the DVR setup and choose different fonts and different display corners. [ MagicRadar ] User’s Manual...

This manual is also suitable for:

Ts04 Cs04 Cs08 Cd08 Cs16 Cd16 ... Show all

MagicRadar T04 Owner's Manual

Appendix

Hardware Installation

Software Installation

Appendix 1 POS DVR

Quick Links

Table of Contents

Need help?

Questions and answers

Summary of Contents for MagicRadar T04

This manual is also suitable for:

Table of Contents