Odys 68006 User Manual page 57

ODYS Slim TV 68006
No video TV screen is off or in the
incorrect video mode
Device not properly
connected
Device is in AV IN mode
Poor video and/or audio Disc dirty or deformed
quality
Repeated playback of a Loop mode is switched on Exit the loop mode
section
Disc dirty or deformed
Remote control does Obstacle between remote
not work control and DVD player
Remote control not
pointed at DVD player
Remote control battery
inserted the wrong way
Battery too low or
completely discharged
Other possible causes for problems:
Static discharges or other external interferences can cause the DVD player
to malfunction. When this happens, disconnect the power plug from the
mains socket and plug it back in.
If the problem persists, disconnect the device from the mains again and
contact Customer Service or a repair shop.
Turn on LCD screen
and/or set correct video
mode
Check connexions and
connect device in the
correct way
Deactivate the AV-In
signal input using the AV
button
Clean disc, or insert other
disc
Clean disc, or insert other
disc
Remove obstacle
Point remote control
directly at DVD player
Check the battery's
polarity and, if necessary,
insert battery correctly
Insert new battery
57