Related Manuals for PenRecorderPro HD2
Summary of Contents for PenRecorderPro HD2
- Page 1 HD 2K Camera USER MANUAL www.penrecorderpro.com PenRecorderPro™ and respective logos are trademarks of Teton Webstores LLC ©2016 ALL RIGHTS RESERVED...
-
Page 2: Table Of Contents
Table of Contents Key Features 1. Operating Tips 2. Charging 3. Turn on/off & Standby 4. Continuous Recording 5. Motion Activated Recording 6. Loop Recording Explained 7. Taking Photos 8. Audio Only Recording 9. Auto Power Off 10. Reset 11. Time/Date Stamp 12. -
Page 3: Key Features
Features - Superior image sensor for low light video recording, quickly responds to changes in lighting; - Super HD 2K @ 30fps (2304x1296); - HD 1080P @ 30fps (1920x1080); - 720P @ 30/60fps - fluid fast action recording; - H.264 compression; - Motion Activation Mode;... -
Page 4: Operating Tips
Operating Tips **PLEASE READ** A. The indicator light on the back of the HD2 can be difficult to see if you look at it straight on. To see it more easily try looking through the hole at an angle; B. If your HD2 malfunctions, please reset it (step 10);... -
Page 5: Turn On/Off & Standby
Continuous Recording A. Power on the HD2 as in step 3. The HD2 will automatically begin to record video; B. Press button to stop recording. The HD2 will enter standby mode and the indicator light will be solid blue;... -
Page 6: Motion Activated Recording
D. Each time you start/stop recording, a new video file is created; NOTE: In order to avoid large file sizes that may cause the HD2 or your computer to freeze, recordings are divided into 10 minute intervals. NOTE: Be sure to open lens cover before recording. -
Page 7: Loop Recording Explained
When the memory fills up the HD2 will automatically start recording over the oldest files. While recording in motion activation mode the HD2 will never stop recording due to a full memory. NOTE: Loop recording does not function in continuous video recording or audio only mode. -
Page 8: Audio Only Recording
B. When the memory is full, both the blue and green light will blink for a few seconds and the HD2 will shut down (unless it is in motion activated mode); C. If the HD2 is in standby mode for over 2 minutes, it will shut down;... -
Page 9: Reset
NOTE: We have included universal instructions that work for both MAC and Windows. However, if you are a windows user, you can use the program located in the root folder of the HD2 called “PowerCam Setup.exe” to change time/ date. - Page 10 1. Connect your HD2 to the computer while the HD2 is turned off; 2. It will mount as a removable drive; 3. Open the removable drive and open the program called “PowerCam Setup.exe” located in the root/main folder; 4. Change the settings to your desired time/ date, click “Create Configuration File”...
- Page 11 6. Save the changes to the “usercfg.txt” file; then copy and paste the file into the root/main folder of the HD2 (DO NOT remove the file from the “Settings” folder); 7. The next time you record a video, the settings will take affect;...
-
Page 12: Change Video Settings
6. Save the changes to the “usercfg.txt” file; then copy and paste the file into the root/main folder of the HD2 (DO NOT remove the file from the “Settings” folder); 7. The next time you record a video, the settings... -
Page 13: Settings Explained
**IMPORTANT** After inputting your desired settings, DO NOT remove the “usercfg.txt” from the “Settings” folder. You must copy and paste it into the root folder. It will disappear from the root folder after the settings take affect. We have included a file called “usercfg(backup).txt”... - Page 14 AutoPowerOff= ;Auto Power Off:0:Never, 1:30sec, 2:1min, 3:2min, 4:3min, 5:5min Flicker= ;0:50Hz, 1:60Hz [Min:0, Max:1] TimeStamp= ;0:Time+Logo, 1:Time, 2:Logo, 3:None [Min:0, Max:3] MotionSensitivity=3 ;0:Off, 1:Low, 2:Middle, 3:High [Min:0, Max:1] TimeStampLogoTXT= ; Input whatever you want here, i.e a police department might want the name of the office to display on the video.
-
Page 15: Caution
Caution Here are few tips and things to watch out for when using your pen: A. At times, the HD2 may become hot during recording - this is normal. To ensure cooling avoid blocking flow of air to the HD2;... -
Page 16: Specifications
Specifications View Angle 65° Min. Illumination 1 Lux Video Format Compress Format H.264 Advanced Version Video Resolution 2304x1296; 1920x1080; 1280x720 Frame Rate 1296P/1080P @ 30FPS; 720P @ 30/60FPS Photo Format JPG 4352x3264 Storage 32GB, 64GB, 128GB USB Interface USB 2.0 Battery Charge DC 5V/1A Battery Capacity... - Page 18 MID: ECM-P28B 1 Year Warranty All PenRecorderPro™ brand products are backed by our 1 Year Warranty. For full details visit www.penrecorderpro.com...