Limited Manufacturer's Warranty - Balteco VARIO User Manual

VARIO ENG
3.3. DISINFECTING
Solid surface is not manufactured with any material that would promote the growth of
any bacteria such as mold or mildew.
3.4. CLEANING OF DRAINAGE SYSTEM
The drainage system is assembled from standard plastic drain components. To re-
move a possible clog up a standard household drainage cleaning agent may be used
that is allowed for such purpose. Remove the drain cover by turning it contra clock-
wise (baths) or pull it up/off (shower trays) and pour carefully the cleaning agent to the
drain tube not spilling the pipe cleaner over product surfaces.
3.5. STEAM GENERATOR SERVICE
Look section 2.6, Steam generator service - SERV!
3.6. REPAIRS
For possible need of repair of the product please contact the dealer for further infor-
mation. Minor damage that may accidentally occur is most often repairable.
3.7.LIMITED MANUFACTURERS' WARRANTY
• Limited Manufacturers' Warranty covers the product against concealed defects and/
or other defects that appear only if the product has been used according to this instal-
lation manual.
• Limited Manufacturers Warranty is limited only to repairs and or replacement of de-
fective parts and the Manufacturer does not accept any further liabilities of any kind
beyond that.
• Limited Manufacturers' Warranty only applies if all shipping, storing, installation,
operation and maintenance/cleaning conditions have been duly followed.
• Limited Manufacturers' Warranty covers only the replacement of the subparts suffer-
ing the defects and does not cover any shipping and/or replacement charges.
• Limited Manufacturers' Warranty does not cover normal wear of the unit upon inten-
sive use or any damage to the unit or its sub-parts in result of improper and/or blatant
use of the unit.
• Limited Manufacturers' Warranty for any parts in contact with water does not cover
the defects and/or malfunction arising from water hardness, or impurity, or negligent
cleaning problems.
• Limited Manufacturers' Warranty does not cover any indirect losses and/or loss of
profits, nor does cover any indirect or related costs arising from the defect or malfunc-
tion of the unit.
• Gloss reduction, scratching, and staining on solid surfaces incurred over time due
to use is NOT a manufacturing defect but is considered normal wear and tear – The
forgoing is NOT covered under the Limited Warranty. However, the product can be
re-sanded and repolished. For possible need of repair/repolish of the product please
contact the dealer for further information.
14