also check the "enable" box and click apply. The enable box allows you to store filter
settings commonly used but not have them active.
5.3.3
MAC Filtering
Choose Advanced > MAC Filtering to display the following page.
This page is used to prevent PCs from sending outgoing TCP/UDP traffic to the WAN
via their MAC address
This is useful for the fact that the MAC address of a specific NIC card never changes,
unlike its IP address which can be assigned via DHCP server or hard-coded to
various addresses over time.
5.3.4
Port Filtering
Choose Advanced > Port Filtering to display the following page.
SR808ac Cable Modem User Manual
Figure 16 MAC filtering configuration
22