Table of Contents
Advertisement
CONNECTIONS
PAGE
11
Connecting
to
an
Audio
System
You
can
listen
to
the sound of audio CDs and DVD video discs in
stereo.
TO TV
EXTERNAL
INPUT
PAL
NTSC
AUTO
AUDIO
OUT
VIDEO
OUT
L
R
5.1CH AUDIO OUT
DIGITAL
OUT
FRONT
RER
L
R
CENTER
WOOFER
DIGITAL
OUT
S-VIDEO
OUT
VIDEO
OUTPUT
S-VIDEO
COMPONENT
OPTICAL
COAXIAL
To audio
inputs
of the
amplifier
Audio
system
To VIDEO OUT
To AUDIO OUT
(L/R)
S-video cable
(Supplied)
To S-VIDEO OUT
To video
input
To S-video
input
TV
or
monitor with
audio/video
inputs
Audio cable
(Supplied)
Video cable
(Supplied)
If the TV has
an
S-video
input,
connect
the DVD
player
with the S-video cable.
Refer
to
the owner's manual of your audio
system
as
well.
When you
connect
the DVD
player
to
other
equipment,
be
sure
to turn
off the power and
unplug
all of the
equipment
from the
wall outlet before
making
any connections.
If you
place
the DVD
player
near a
tuner
or
radio,
the radio broadcast sound
might
be distorted. In this
case,
move
the DVD
player
away from the
tuner
and radio.
The
output
sound of the DVD
player
has
a
wide
dynamic
range. Be
sure
to
adjust
the receiver's volume
to
a
moderate
listening
level.
Otherwise,
the
speakers
may be
damaged by
a
sudden
high
volume sound.
Turn off the receiver before you
connect
or
disconnect the DVD
player's
power cord. If you leave the receiver power
on,
the
speakers
may be
damaged.
Warning
Do
not set
the
Digital
Audio
Output
of this DVD
player
to
"Dolby Digital"
unless you
are
connecting
the DIGITAL OUT
jack
of this DVD
player
to
an
AV decoder that has the
Dolby Digital decoding
function.
High
volume sound may
damage
your
hearing
as
well
as
the
speakers (Refer
to
"Selecting Digital
Audio
Output"
on
page
39).
Notes
Advertisement
Table of Contents
