Page 2
REGULATORY INFORMATION FCC Statement This product has been tested and found to comply with Part 15 of the FCC Rules. Operation it subject to the following conditions: it may not cause harmful interference and must be accept interference received, including interference that may cause undesired operations.
Page 3
pressed. Valid keys are ‘0’ through ‘9’. Overview: Valid RF Channels are ‘1’ through ‘82’. The RI RF Keypad is designed to be used with the While in Set RF Channel mode pressing a RI RF Receiver connected to a PC. The keypad valid key will cause the status LED to transmits key presses via radio frequency to the RF briefly flash YELLOW.
Page 4
Blinking Green and Blinking Red will only occur if Auto Match Mode(find RF Receiver) the Receiver is configured to indicate a correct or Press Go/Login, while holding Go/Login, incorrect answer (CORRECT POLLING mode). quickly press and hold ‘?’. Release both keys.
Need help?
Do you have a question about the ResponseCard RF RCRF-02 and is the answer not in the manual?
Questions and answers