1. Manuals
  2. Brands
  3. ALCAVA Manuals
  4. Inverter
  5. EPD-200
  6. Instruction manual

ALCAVA EPD-200 Instruction Manual

Dc to ac power inverter, power: 200w & 350w
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

DC TO AC POWER INVERTER
POWER: 200W
350W
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EPD-200 and is the answer not in the manual?

Questions and answers

Summary of Contents for ALCAVA EPD-200

  • Page 1 DC TO AC POWER INVERTER POWER: 200W 350W Instruction Manual...
  • Page 2 1.DESCRIPTION OUTPUT RECEP TACLES: Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 Type 7 (UNIVERSALLY USE) Power ON FAULT - When over load, Battery Low,Battery High, over temperature. AC output socket Power Switch DC INPUT DC INPUT DC INPUT 12V/24V DC INPUT : 12V/24V...
  • Page 3 When connected to an appliance, remember to turn on the inverter before turning on the appliance. if the buzzer sounds during operation, this indicates that the battery voltage is very low and that the inverter will be shut-down. (When over load happens it will be shut-down, untill user reduces loading. and restart your inverter.) "Turn on"...
  • Page 4 Unplug the AC inverter when not in use. Unplug the AC inverter when starting the vehicle's motor. If the AC inverter makes a beeping sound:switch off your appliance, unplug the inverter and restart your vehicle's engine. The beeping sound is simply the low-battery warning which indicates that the voltage of your battery is getting low.
  • Page 5 We recommend that the buyer refrain from using an extension cord between the DC power source and the inverter's DC input. Connecting an extension cord to the DC input will create a voltage drop, entailing reduced efficiency output.Instead, we recommend the use of an extension cord between the output and the AC appliance.
  • Page 6 The output wave of the AC inverter is a MODIFIED SINEWAVE. If you choose to measure the AC output voltage, you must use an AUTHENTIC RMS VOLT METER. Using any other type of voltage measuring device will result in an AC voltage reading that is up to 20 to 30 volts lower than the rated value.
  • Page 7 The chassis earthing lug should be connected to an earthing point, which will vary depending on where the power inverter is installed. In a vehicle, connect the chassis ground lug to the chassis of the vehicle. In a boat, connect to the boat's grounding systems.
  • Page 8 Specifications subject to change without notice WARNING: DO NOT DISASSEMBLY THE UNIT. HAZARDOUS VOLTAGE! DANGER! PLEASE RETURN TO THE DEALER IF YOU FIND ANY PROBLEM WITH THE UNIT. Model No. EPD-200 EPD-350 DC 10.5-15V DC 10.5-15V DC input voltage DC 21-30V Auto switch...

This manual is also suitable for:

Epd-350

Table of Contents