Vizio KWR600001/01 User Manual page 7

2.2.4 Device mode change
For the remote function, there are Bluetooth TV mode ( as mentioned in 2.2.1) and IR device
mode, under IR device, there are multiple devices, they are SAT/CABLE, TV (IR TV), VCR,
DVD / Blue ray / HD, PVR, Audio (Tuner/Receiver) and Amplifier.
When user active device change function on the TV, the device name or icon will display on
TV, user can use navigate key to move between devices, press <ok> key on remote will
inform TV to make device selection.
2.2.5 ID setup
There is a table contain devices, brand names and code set IDs stored in TV, this function is
to setup IR database code set ID for an IR device.
For example user have a Philips DVD player, user select DVD device, and select brand
Philips, under Philips there may have multiple code sets, each code set represent a physical
remote control codes. After make the selection, the remote will understand what control code
to transmit.
TV application can assign default code set for each device, or leave it blank,
There will be 11 devices.
SAT CABLE TV ( IR TV)
Below example is a very short piece of brand name list and code sets ID list
Panasonic 115 130 160 169 170 172 175 176
177 181 196 201 215 216 217 218
219 220 228 229 307
Penney 065
Philco 080
Philips 048 053 161 180 184 202
Philips
Magnavox 162
Pioneer 049 051 085 088 096 099 129 132
140 168 193
2.2.6 Volume mapping function
Volume mapping means that the Audio control keys ("Volume Up", "Volume Down" and
"Mute") under the desired device mode will have its IR codes transmitted for the device being
programmed under the Secondary device if there is any.
Otherwise, it will send its command via BT module under Bluetooth TV mode.
Default setting for volume control function: Vol + / Vol - / Mute will map to Bluetooth TV
volume control. This mapping info will store in TV. TV will maintain this volume control
mapping table.
Blue
VCR DVD
ray HD
PVR Tunner Receiver Ampilfier