PUREGEAR PureSwitch 06158PG User Manual

Hide thumbs

PureSwitch

User Manual

Before You Get Started:

• Controlling this HomeKit-enabled accessory away from home requires an Apple TV (3rd generation or later)

with tvOS 9.0 or later and an iPhone,

*To learn more about HomeKit, visit:

• PureSwitch

requires a WiFi connection.

• For indoor use only.

Your device operating system (iOS) should be iOS 8.1 or later.

• Turn on your devices' Wi-Fi under Settings.

• Make sure Allow "Hey Siri" is on. To do this, go to Settings/General/Siri/Allow. The "Hey Siri" button should

be green/on.

• Make sure you're signed into your iCloud account.

• Turn on iCloud Keychain. To do this, go to Settings/iCloud/Keychain/iCloud. The Keychain button should

be green/on.

• Plug the PureSwitch

Please note:

• Your PureSwitch

is also referred to as an accessory.

• A device refers to an iPhone,

• An appliance refers to the item you are connecting to the PureSwitch,

Getting Started

Please note: If you are setting up multiple PureSwitches, plug in and pair one at a time.

1. Download the PureSwitch

2. Open the PureSwitch

3. Press + ADD ROOM. Enter the room name, such as "Office".

4. To pair the PureSwitch

then PureSwitch

-XXXXXX (your custom six-digit alpha-numeric code) will appear.

5. You'll see Accessory Name PureSwitch

6. A prompt will ask you to add accessory to network, press ALLOW.

7. Scan your pairing code or enter it manually. Your pairing code is located on the PureSwitch

Renaming a Home, Room or Accessory

To change the name of a Home, Room or Accessory:

1. Press the pencil icon to the right of the current name.

2. Enter the new name, then press DONE.

Deleting a Home, Room or Accessory

To delete a Home:

• Go to the Home screen of the home you want to delete. Press DELETE HOME at the bottom of the screen. Or

simply swipe to the left on the home you want to delete.

To delete a Room:

• Go to the Home screen. Identify the Room you want to delete, then swipe its name from right to left. Press DELETE.

To delete an Accessory:

• Go to the Accessory screen of the accessory you want to delete. Press DELETE ACCESSORY at the bottom of

the screen. Or simply swipe to the left on the accessory you want to delete.

iPad

or iPod touch

https://support.apple.com/en-us/HT207057

into an outlet, and then plug in the appliance you want to control.

iPad

or iPod touch.

app from the app store. When asked to access your data, press ALLOW.

App. Press +ADD HOME to create your home.

to your network, press + ADD ACCESSORY. You'll see "Browsing for new accessories,"

-XXXXXX. You may assign room or add room, once completed press ADD.

with iOS 8.1 or later.

such as a lamp.

plug.

Table of Contents

Need help?

Do you have a question about the PureSwitch 06158PG and is the answer not in the manual?

Questions and answers

Summary of Contents for PUREGEAR PureSwitch 06158PG

Page 1 7. Scan your pairing code or enter it manually. Your pairing code is located on the PureSwitch plug. ® Renaming a Home, Room or Accessory To change the name of a Home, Room or Accessory: 1. Press the pencil icon to the right of the current name. 2. Enter the new name, then press DONE. Deleting a Home, Room or Accessory To delete a Home: • Go to the Home screen of the home you want to delete. Press DELETE HOME at the bottom of the screen. Or simply swipe to the left on the home you want to delete. To delete a Room: • Go to the Home screen. Identify the Room you want to delete, then swipe its name from right to left. Press DELETE. To delete an Accessory: • Go to the Accessory screen of the accessory you want to delete. Press DELETE ACCESSORY at the bottom of the screen. Or simply swipe to the left on the accessory you want to delete. ©2017 PureGear | PureSwitch Manual...
Page 2 Rules Adding a Rule What is a Rule? A Rule is a helpful trigger that activates your PureSwitch remotely based on time or location. ® Note: Please make sure your GPS/Location services are ON before setting up Location Rules. Rules cannot be shared with Guest users, only the creator can see the Rules. 1. Press Rules at the bottom of your screen. 2. Press + Add Rule. Enter the Rule name. Press Add. If you prefer to base your rule on a timer, press Time. Please note: You must create a scene before you can create a time rule. 1. Select the date/time. You can then set it to recur based on every hour, every day or every week. 2. Choose the scene you wish to activate with this time rule. ©2017 PureGear | PureSwitch Manual...
Page 3 Designating a Primary Home Now that you have access to two homes, you want to establish your home as the primary one. 1. Go to the Homes screen. Press Your Home. Press the checkmark icon to the right of that name. Troubleshooting Resetting the PureSwitch ® If any step above does not work in setting up your PureSwitch , follow these steps: ® 1. Press and hold down the small, round button on the bottom of the PureSwitch for 15 seconds until the LED ® light switches off, then back on again. Please wait until you hear a click. 2. Restart your iPhone, iPad or iPod touch. ® ® ® 3. Make sure your iPhone, iPad or iPod touch is installed with iOS 8.1 or later. ® ® ® Thank you for purchasing the PureGear PureSwitch! ©2017 PureGear | PureSwitch Manual...
Page 4 • WPA2 – Personal R.F Power rating: 0.177W Certification ID: WFA61263 CAN ICES-3 (B)/NMB-3(B) Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution Do not plug in any product except for power supply cord (Max. 1.5m length with 1.0mm square). Not recommended for use with power strips. Use of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Apple, iPhone, iPad, iPod touch, and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. HomeKit is a trademark of Apple Inc. ©2017 PureGear | PureSwitch Manual...