Changing A Wheel - DS Automobiles DS 5 Handbook

Changing a wheel

Procedure for changing a wheel with a damaged or punctured tyre for the spare wheel using the tools provided with the vehicle.
Access to the tools
The jack is stowed in a box attached to the
spare wheel.
The assembly is secured under the vehicle by
means of a winch system.
Refer to the "Access to the spare wheel"
section.
To open the tool box:
F press the tab, slide the lid on the box half
way, then remove it.
The other tools are stowed in a well under the
boot floor.
The jack must only be used to change
a wheel with a damaged or punctured
tyre.
Do not use any jack other than the one
supplied with this vehicle.
If the vehicle does not have its original
jack, contact a CITROËN dealer or a
qualified workshop to obtain the correct
jack for it.
The jack does not require any
maintenance.