Chapter 2 Web-Gui; System Configuration Login; Figure 2-1 Login Page - Airspan Networks ASMAX2300 User Manual

Chapter 2 WEB-GUI

This chapter describes how to configure the CPE in order to connect to the base
station.

2.1. System Configuration Login

The CPE will enable a DHCP server by default. Computers or network devices
connected to its LAN side can get IP address automatically from CPE. If you disable
CPE's DHCP server by yourself, set the IP address, net mask, and gateway as
following.
IP address: 10.1.1.x, 1 ≤ x ≤ 253
Netmask: 255.255.255.0
Gateway: 10.1.1.254
Connect to http://10.1.1.254/
one shown in Figure 2-1. The administrator username and password are as shown
below:
Username: admin
Password: admin
WiMAX CPE also support multi-level user login. Please contact with us to define
multi-user features.
with a browser, and you will see a webpage such as the

Figure 2-1 Login Page

2-3