Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Temco SG01
- Page 1 BONE CONDUCTION HEADSET SUNGLASSES TYPE OWNER’S SG01 MANUAL ●Thank you for purchasing our product. ●Please review this “OWNER’S MANUAL” carefully before using this product. ●Please keep this manual available for quick reference.
-
Page 2: Safety Instructions
Safety Instructions ● Review this “Safety Instructions” before using the product for safe and correct usage. ● All of the following contains important safety instructions and must be strictly followed. ● Descriptions of sign and terminology are as follows. 〈Terminology〉 Wrong usage may cause serious or fatal injury to people. - Page 3 CAUTION DO NOT expose the product to heavy rain. Such condition may cause malfunction. Prohibited DO NOT expose the product to open flame or under the direct sunlight for a prolonged period of time. Such environ- Prohibited ment may cause malfunction or fire. DO NOT drop or apply shock to the product.
-
Page 4: Before Using The Product
Kit Checklist Ensure that the package contains all of the following. ●Sunglasses ●USB Charge Cable ●Glass wiper ●Case ●Owner ’ s Manual Parts ②Microphone ⑤Indicator（Blue） ⑧USB Charge Cable ⑥Indicator（Red） ①Bone Conduction Speakerr ⑦Charge jack ③Volume control button ④Power/Pairing button ⑩Modern (pads) ⑨Charge plug Before Using the Product Charge the headset using the attached USB Chage Cable⑧. -
Page 5: How To Use
How to Use 1. ON/OFF power switch. Push Power/Pairing button from 7 seconds. Blue indicator ⑤ flashes（slow）as the power turns ON. Another push to the Power/Pairing button ④ from 7 seconds turns the power OFF and the indicator goes out. 2. - Page 6 GPS navigators that come provided with a communication system. To connect the SG01 to your mobile phone or mp3, it is necessary to make an initial setting operation called “PAIRING”. The PAIRING process is required for only the first time you are going to use your SG01 system.
- Page 7 7. To switch a call Push the volume control button ③ from 3 to 6 seconds while talking on the headset. The call is switched from the headset to your mobile phone. Also, while talking on the mobile, push the volume control button ③ on the headset from 3 to 6 seconds to switch the call from the mobile to the headset 8.
-
Page 8: Specifications
Note 1. Rechargeable high-performance lithium polymer battery is used, but it is expendable. Although the battery under normal use has a long life, such characteristic deteriorates with time. For maximum perfor- mance, usage under normal temperature is recommended. 2. In outdoor use under strong wind condition, party on the other end may have difficulty hearing your voice. -
Page 9: Troubleshooting
Troubleshooting If problem arise, refer to the following before requesting repair service. Common Problem Check point ●Electric power does ●Battery is fully charged. not turn ON ●Power/Pairing Button is pushed 3 to 6 seconds. ●Pairing process with mobile phone is completed. ●Other party ’... -
Page 10: Warranty
In case of malfunction in spite of correct usage that is consistent with this Owner ’ s Manual and if it occurs during the valid warranty period, we provide free of charge repair service or replace defect product. Temco and Buhek shall not be liable for any incidental or consequential damages resulted from malfunctioning of the product. - Page 11 FCC ID: OQB-SG01 IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation.
Need help?
Do you have a question about the SG01 and is the answer not in the manual?
Questions and answers