Table of Contents
Advertisement
Quick Links
www.colorato.net
INSTRUCTION MANUAL
GAS HEATER
CLGH-42N
READ
INSTRUCTIONS
CAREFULLY:
READ
AND
FOLLOW
ALL
INSTRUCTIONS. PLACE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE
REFERENCE. ONLY USE IN A WELL VENTILATED AREA.
WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED
EXACTLY. A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY
DAMAGE. PERSONAL INJURY OR LOSS OF LIFE.
Advertisement
Table of Contents
Related Manuals for COLORATO CLGH-42N
Summary of Contents for COLORATO CLGH-42N
- Page 1 INSTRUCTION MANUAL GAS HEATER CLGH-42N READ INSTRUCTIONS CAREFULLY: READ FOLLOW INSTRUCTIONS. PLACE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE. ONLY USE IN A WELL VENTILATED AREA. WARNING: IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY. A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY...
-
Page 2: Technical Characteristics
TECHNICAL CHARACTERISTICS Type : MOBILE GAS HEATER Dimensions : 36*41*72 (D*W*H ) Category : I3B/P(30) Pressure : 30mbar Heater output : High 4.2 kW : 2.9 kW : 1.55 kW Consumption : High : 305g/H : 210g/h : 105g/h Ignition system : Piezo electric Injector size : 0.58 mm... -
Page 3: Safety Precautions
SAFETY PRECAUTIONS 1. Always use heater in accordance with 2. DO NOT place clothes or other materials instructions supplied with each heater. on the heater. This could cause a fire risk Keep instructions in a safe place. and/or affect the efficiency of the appliance. 3. -
Page 4: Using Environment
USING ENVIRONMENT Your heater consumes oxygen while it is in function. For that reason, adequate ventilation should be provided in rooms in which the heater is used. This ensures the removal of products of combustion and allows the entry of replacement air. Adequate ventilation should considerably reduce the possibility of condensation occurring. -
Page 5: Construction And Function
14. When lighting your heater for the first time or after a period of time has passed since the last use, light the heater outside and burn outdoors for 15 minutes. 15. The guard on the appliance is to prevent risk of fire or injury form burns and no part of it should be permanently removed. -
Page 6: Lighting Instruction
sources of ignition. With the regulator connected to the cylinder turn on the regulator control. Brush all hose connections, pipe connections to the valve and gas cylinder valve with a 50:50 solution of detergent and water. A stream of bubbles forming indicates a leak. If a leak is found turn off at the regulator and disconnect the regulator from the bottle and remove the gas cylinder outdoors or to a well ventilated area. -
Page 7: Heat Settings
that the heater is at the minimum position (Pos.1). If the pilot flame goes out please repeat this procedure. 3. HEAT SETTINGS To change from minimum to maximum gently press control button and turn it to position 3. To change from maximum to medium gently press control button and turn it to position 2. 4. -
Page 8: Maintenance
STORAGE 1. Disconnect cylinder. 2. Store cylinder in a well-ventilated area away from combustible material. Storage preferable be in an outhouse but must not be in a basement or high-rise flat. 3. The heater should be covered in a dry, dust-free area in its original packaging. CLEANING 1. -
Page 9: Fault Finding Chart
FAULT FINDING CHART Problem Problem Causes What To Do Regulator & hose connection loose Use soap form for leakage control, check all Valve & pipe connection system replace defected parts connection loose Pipe broken Smell of gas Inspect perimeter of each plaque and locate place Missing piece where some fireclay has been displaced.
Need help?
Do you have a question about the CLGH-42N and is the answer not in the manual?
Questions and answers