Specifications - Rebis Audio RA402 Operator's Manual

SPECIFICATION
Input Gain controls: Continuously variable up to 20dBs of boost.
Equalisation controls: Continuously variable boost or cut up to 21db.
Bandwidth controls: Continuously variable from
5.5dB/octave to 36dB/octave.
Peak Indicator: The LED will light and stay on for 100mS if the peak
positive or negative level anywhere in the system exceeds +21dBm.
Frequency controls: Continuously variable over
Section 1: 20Hz to 450Hz
Section 2: 70Hz to 1.6kHz
Section 3: 250Hz to 5.6kHz
Section 4: 800Hz to 18kHz
Section overlap 2.7 octaves
Bypass: Each section has an In/Out switch.
Each channel has an In/Out switch.
Frequency Response: +1dB from 20Hz to 20kHz.
Input Impedance: 100 kilohms per leg.
Maximum Input level: +21dBm.
Output Impedance: Less than 50 ohms.
Maximum Output: Balanced; +28dBm into 600 ohms.
Unbalanced; +22dBm into 600 ohms.
Noise: EQ controls flat, frequency controls
controls on broad.
Distortion: Below 0.05% THD @1kHz @+12dBm.
Power Requirements: 110 to 240 volts 50 to 60Hz.
Dimensions: Width; 19" rack mounting.
Height; 3.5".
Depth; 9.75" (behind front panel).
Better than -80dBm (20Hz to 20kHz).
4.5 octave ranges;
midrange, bandwidth