Page 2
For general cleaning using a damp cloth and warm soapy water only. Scourers and abrasive cleaners are NOT suitable for these types of finish and may damage them. Before using any cleaning agents to remove graffiti etc. try on a small, inconspicuous area first to avoid causing more unsightly damage. TORD specification...
Page 3
Item Description P1036 / 01 1 no. Tord bench slat set and ties (not including bases) - (2 no. outer slats and 3 no. inner slats total) Instructions For Reordering If possible, please specify job name or number at the time of reordering to enable identification of details such as the original species of timber used, stainless steel finishes and polyester powder coat colours etc.
" Surface Fix Tord Bench (surface fix only) 1. Install suitable foundation pads (see illustration) each with top face at ground level 2. Position bench in correct orientation with bases centrally on foundation pads, then mark hole positions through base frame.