Advertisement
Alternatively, you can press the Pair button and hold for 5 seconds to enter the Pairng
5.
mode. In paring mode, the LEDs flashes quickly.
Select "HeadRush 8016808" from the list of discovered Bluetooth devices on your cell
6.
phones, tablets or other Bluetooth media. Wait for the connection to be completed.
7. Enter "0000" if password is required.
8. When Bluetooth connection is made, the first LED will flash slowly
9. You can now enjoy your music.
10.Listen to yout music or make/receive your telephone call on the speaker.
Pairing by One-touch connection with Near Field Communications (NFC)
Press the power button for 3 seconds to turn the speaker on, the speaker will enter pairing
1.
mode immediately. The 4 LEDs will start flashing quickly.
Enable your Bluetooth device such as cell phones, tablets or other Bluetooth media.
2.
Make sure the NFC is enabled in your device.
3.
4. Use your NFC enabled device and touch the NFC logo on the speaker (as shown in the
diagram) , a "beep" sound indicates pairing is successfully done.
5. When Bluetooth connection is made, the first LED will flash slowly.
Advertisement
