Summary of Contents for Traditional Tool Repair Inc. P321
Page 1
OPERATION MANUAL / SPARE PARTS LIST BATTERY - POWERED PLASTIC STRAPPING TOOL MODEL P321 43.0364.02 CE Declaration of conformity We declare that the machine P321 is in conformity with the following standard or standardised documents: 98/37/EEC FROMM Holding AG Hinterbergstrasse 26 CH - 6330 Cham 27.03 2001...
SAFETY INSTRUCTIONS Read these instructions carefully. Failure to follow these instructions can result in severe personal injury. Operation with battery Strap warnings Never use strap as a means of pulling or lifting loads. Failure to Environment protection: follow these warnings can result in severe personal injury. •...
Description of the tool The tool model P321 has been designed to strap packages with plastic strapping. The plastic strapping is fed around the package manually or in combination with a strap feeder. The straps are inserted in the tool, automatically tensioned, sealed by friction welding and separated.
Use only parts and accessories mentioned in the operating instruction. Using other parts or accessories can cause injuries to you and other persons. Battery One battery is included in the P321 delivery. Battery for replacement or exchange can be N5.4309 ordered under item number N5.4309.
OPERATING ELEMENTS Green During tensioning the LED lights green. Switch rocker Green During welding the LED lights green. Yellow Cooling time is running, the lever must be held in welding position. Green Cooling time elapsed, turn the lever in start position. Charge the battery.
Adjustments 5.2.1 Preselecting of strap tension and tensioning speed Do not adjust the tensioning force too high. If the tensioning force is higher than the tensioning strength of the strap, the strap will tear while the tensioning. Tensioning force and tensioning speed can be Adjusting knob tensioning force / tensioning speed preselected with the right adjusting knob.
Feeding the strap around the package The strapping is fed around the package as illustrated. Warning! The plastic strap which will be welded must be free from oil, grease and other dirt. Dirty plastic straps can't be welded correct! Inserting the strap Pull up the handle lever firmly with your right hand.
Sealing the straps While welding the plastic strap the lever must be pressed forward against the front stop until the cooling down time is elapsed. Disregarding of this regulation will cause insufficient seal efficiency, what can cause severest injuries. Press the lever with the left hand forward against the stop and keep it pressed.
SPARE PARTS LIST 43.0364.02 43.0364.02 P321/16/0.65-1.05 P321.0001.02 09.03.04 Item-No. in group Pcs. Description Dimension Field N1.1305 2 SCREW M4 X 7.8 N1.1328 P32.0130 2 SCREW M3 X 10 N1.1553 P32.1701 1 HEXAGON SCREW M4 X 8 N1.1904 4 SCREW M5 X 20 N1.1909...
Page 13
43.0364.02 P321/16/0.65-1.05 P321.0001.02 09.03.04 Item-No. in group Pcs. Description Dimension Field N2.5621 P32.0115 14 CUP SPRING 15 X 8.2 X 0.7 N2.5822 P32.0130 1 TORSION SPRING 1.25 X 11/3.75 N2.5823 1 TORSION SPRING 2.8 X 17/4 N3.1134 P32.0130 1 BALL BEARING 7 X 22 X 7 N3.1134...
Use of consumable products not recommended by FROMM Holding AG We reserve the right to modify the product at any time in order to improve its quality. APPROPRIATE USE The tool model P321 has been designed to strap packages with plastic strapping exclusively. The warranty / liability excludes: •...
10 EXCHANGE OF WEARING PARTS Remove always the battery from the tool before starting maintenance works. 10.1 Exchange of tensioning wheel and grippers Disassembling • Unscrew end cover P32.1726 and remove it; • Remove the torsion spring N2.5823; • Remove the tensioning body P32.1703; •...
10.2 Exchange of cutter, welding stop gripper and welding gripper Disassembling • Unscrew cover P32.1211 and remove it; • Unscrew end cover P32.1726 and remove it; • Disassemble security ring N2.1118, pull the grip axle P32.1215 from the tool; • Tilt down the handle lever P32.1212 and remove it from the tool;...
Assembling Assembling in opposite order. Observe the following: • Pay attention to the proper seat of the thrust piece on the spring bolt P32.1030 when lifting the rocker. • Pay attention to the fitting position of the cutter (see drawing). Lubrication •...
(see name and address on the rear page of this manual). Use original packing. The battery powered plastic strapping tool P321 is a high performance tool. We strongly recommend you to have it serviced by an authorized service shop after 12 months at the latest if used one shift per day. If used two or more shifts per day the tool has to be serviced after a shorter period of time.