1. Manuals
  2. Brands
  3. Shenzhen SecuEasy Electronic Co. Manuals
  4. IP Camera
  5. SEWIFIIPCVW
  6. User manual

Shenzhen SecuEasy Electronic Co. SEWIFIIPCVW User Manual

Wifi, dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

WIFI
IP Camera
(DVR)
User Munual
Important Safeguards and Warnings
Do not place heavy objects on the DVR.
Do not let any solid or liquid fall into or infiltrate the DVR.
Please brush printed circuit boards, connectors, fans, machine box and so on regularly. Before
the dust cleaning please switch off the power supply and unplug it.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SEWIFIIPCVW and is the answer not in the manual?

Questions and answers

Summary of Contents for Shenzhen SecuEasy Electronic Co. SEWIFIIPCVW

  • Page 1 WIFI IP Camera (DVR) User Munual Important Safeguards and Warnings Do not place heavy objects on the DVR. Do not let any solid or liquid fall into or infiltrate the DVR. Please brush printed circuit boards, connectors, fans, machine box and so on regularly. Before the dust cleaning please switch off the power supply and unplug it.
  • Page 2 Do not disassemble or repair the DVR by yourself. Do not replace the components by yourself. Environment： Please place and use IP camera under temperature between-10℃~60℃ and humidity less than 9%； Do not use IP camera in smoky or dusty environment； Avoid collision or strong fall.

  • Page 3: Product Introduction

    Catalogue Chapter One: Product introduction 1.1 Product summary The series DVR is designed specially for security and defence field which is an outstanding digital surveillance product. It introduces embedded LINUX operating system which is more stable. It introduces standard H.264mp video compressed format and G.711A audio compressed format which insures the high quality image, low error coding ratio and single frame playing.
  • Page 4 1.2 Porduct main function Real-time surveillance ·with analog output interface can do surveillance through device of monitor or DVR, etc. Compression format · Audio and video signal is compressed by individual hardware, to make the image and voice synchronously stable Video playback function ·can do full real-time record, and search, net surveillance, video search and download, etc.
  • Page 5 Chapter Two: Open case checking and cable connection 2.1 Open case checking When you receive this product, Firstly, check model No. on product is the same as what you ordered； Then, check if there is obvious damage on packing, the protective material used for packing can afford most unexpected strike during transportation；...

  • Page 6: Video Output Connection

    2.4 Video output connection 2.4.1 choose and connect video output device 1.BNC output： BNC video output is divided into: PAL/NTSC BNC(1.0V ，75Ω)，can be connected to monitor or surveillance integrated equipment such as DVR, etc. BNC output can support preview of the monitor image only. Make sure the stable and reliable of transmission link：...
  • Page 7 The video signal line should be away from the electro magnetic Interference and other equipments signal lines. The high voltage current should be avoided especially. Insure the connection stable and credible The signal and shield lines should be firm and connected credible which avoid false and joint welding and oxidation.

  • Page 8: Setting Menu

    Pic : 3.1 Log-in For safty sake, when firstly log-in, please go to “Account” to modify user name and password, see chapter 4.5.2 account manage). 3.4 Preview After log-in successfully, will come out window of bit rate type as pic 3.2, can choose the main stream or extra stream u want for preview, and also can click at left side of preview page to set it.
  • Page 9 Pic: 3.3 shortcut menu 3.5.1 Record Record function including: device record and snapshot settings. 1. Record setting...
  • Page 10 Pic: 3.4 Record setting...
  • Page 11 3.3 Log-in When device turns on normally, need to log-in before operation, system will base on the authority log-in user to provide related function. Default IP address：192.168.1.10，subnet mask：255.255.255.0，gateway：192.168.1.1 When device ex-fty, there are 3 preset users : admin、guest、default，default password is none, admin is preset as super authority user, guest and default is preset with authority of preview and playback, admin and guest user can modify password but not authority, default is the user default log-in,...
  • Page 12 Pic: 3.5 Snapshot setting 3.5.2 Playback at upper left side on monitor page, to enter video click playback page.
  • Page 13 Pic 3.6 Playback 【Playback control button】see detail in below chart； Chart 3.1 playback control button list Remark：Playback by frame should under the status of playback pause. 【Operate tips】to show the button function when cursor point it Special feature：...
  • Page 14 Partial enlargement：when single view full screen playback, can use right button to choose any size of area from the image, click left button in the chosen area, can enlarge this area to playback, double click left button will exit. 3.5.3 Image color Set image parameter of chosen channel (when single view preview, it should be current channel, when multi-view preview, it should be the channel where the cursor stay), you can enter the page by shortcut menu.

  • Page 15: Main Menu Guideline

    Pic: 3.8 Log information Chaper Four: Main Menu 4.1 Main menu guideline Main Menu Submenu Function summary Record Set record config, record type, record period, etc. Record Snapshot Set snapshot period, type , etc. Set motion detect alarm channel, sensitivity, area, linkage Video Alarm parameters: alarm output, snapshot, recording, PTZ, email...
  • Page 16 Set video lost alarm channel and linkage parameters: alarm Video lost output, recording, snapshot, PTZ, Email sending, FTP upload, etc. Set alarm input channel and linkage parameters: alarm Alarm input output, recording, snapshot, PTZ, email sending, FTP upload, etc. Alarm Set alarm mode: configuration, manual, stop output Storage device not exist, not enough space, access storage...
  • Page 17 Exposure mode, Day/Night mode, Backlight compensation, Camera Auto iris, profile, AE reference, AGC, slow shutter, IR_CUT, parameter Image、Over-turn、anti-flicker etc redundant, format disk, recover, partition, etc. Manage Modify user, group or password. Add user or group. Delete Account user or group. Auto Set auto reboot system, time to auto delete file Advanced...
  • Page 18 Pic: 4.1 Record setting 【Length】to set the length of each recording file between 1-120min, default is 60min； 【PreRecord】to record 1-30s before motion happens (time length may slight different due to bit rate) 【Record control】set recode type: timing, manual & stop Timing: Record according to the set video type (regular, detect and alarm)and time period.
  • Page 19 Alarm:Trigger the external alarm signal in the set time section. When above alarm is set as opening recording, the “detection recording” state is on. The video file type is “A”. Remark：related alarm setting, please refer to chapter 4.3 alarm part. 4.2.2 Snapshot storage Setup snapshot parameters for different channels.At first time it's set for 24hours snapshot continuously, pls go to Main Menu->Record->Snapshot Storage for appropriate settings.

  • Page 20: Alarm Function

    Timing: Realise snapshot according to record type(regular,detect and alarm) and period. Manual: No matter what is the current status, once choose "manual" snapshot at related channels. Stop: No matter what is the current status, once choose "stop",it will stop snapshot at related channels. 【Period】Set normal record period, it only startup Snapshot Storage at set period.
  • Page 21 4.3.1 Motion detect When system detects the motion signal that reaches the set sensitivity, the motion detect alarm and the linkage function is enable. Pic: 4.4 motion detect setting interface 【Enable】 means enable motion detect function, enable it firstly then can do related setting. 【Sensitivity】base on sensitivity, can set 6 grades: ，the higher of sensitivity to the moving ；...
  • Page 22 Pic: 4.5 region setting 【Period】Trigger the motion detect signal in the set time section, see pic:4.6. You can set according to week or set uniformly. Each day is divided into four time sections.tick , mean setting is valid.
  • Page 23 Pic: 4.6 Period Setting 【Interval】Only one alarm signal is turned on even there are several motion detect signals in the set interval 0-600s. 【Alarm output】Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on.； 【Delay】Delay a few moments and stop when the alarm state is turned off.
  • Page 24 4.3.2 Video blind When the video image is influenced by the environment such as bad brightness or reaching the set sensitivy parameter, the camera mask function is turned on and the linkage function is enable. Pic: 4.8 video blind Setting detail : refer to chapter 4.3.1 motion detect. 4.3.3 Video lost When the equipment can not obtain the channel video signal, the video loss alarm is turned on and the linkage function is enable.
  • Page 25 Pic: 4.9 Video lost Setting detail: refer to chapter 4.3.1 motion detect. 4.3.4 Abnormal Analyze and detect the software and hardware of current device, when abnormal issue was detected, device will make related respondence.

  • Page 26: System Setting

    Pic: 4.10 abnormal 【Event type】choose event type at drop-down box 【Enable】tick to enable，open abnormal deal function, setting is valid only if it is enable. 4.4 System setting To set parameter of all kinds of functions, setting including: General、Encode、Network、Net service、GUI display、PTZ config/RS485、RS232、Camera parameter.
  • Page 27 4.4.1 General setting Pic: 4.11 General setting 【System time】set current date and time of IP Camera. 【 Date format 】 choose date showing format, including ： year/month/date 、 month/date/year, date/month/year, 【Date separator】Choose list separator of the data format, 【Time format】choose time format, including: 24-hour and 12 hour； 【Language】at present support 29 kinds of language: simplified Chinese, Tradition Chinese, English, Bosnian, Finnish, French, Greek, Hungarian, Italian, Japanese, Germany, Polish, Portuguese, Russian, Spanish, Thai, Turkish, Vietnamese, Romanian,...
  • Page 28 Pic:4.12 DST (Week) setting Pic:4.13 DST(Date) setting 4.4.2 Encode Seting Set video/audio encode parameters, including image parameters of record file, remote monitor, etc. Left part is to set the encode parameter of each separated channel, right part is to set encode parameter of extra stream, dual stream is using one high bit rate stream for local high definition storage, support D1/HD1/CIF/QCIF encode, one low bit rate stream(QCIF encode) for net transmission, in order to maintain local storage and remote net transfer.
  • Page 29 Pic: 4.14 Encode setting Encode setting 【Compression】Standard H.264MP； 【Resolution】show types of resolution: D1/HD1/CIF/QCIF； 【Frame rate】adjustable, real-time standard is： PAL，25 fps NTSC，30 fps； 【Bit rate type】you can choose CBR or VBR, image quality have 6 grades to choose under VBR type, then you can manual choose the bit rate value under CBR type. 【Image quality】set bit rate value to change the image quality, if supporting facility is available, the larger of bit rate value, the better of image quality.
  • Page 30 Extra stream setting Extra stream is used for client side monitor and mobile monitor. The parameter setting of resolution, frame rate, stream control, bit rate value is the same as individual channel 4.4.3 Network setting Pic: 4.15 Network setting 【Net card】you can choose wired net card； 【DHCP enable】to auto get IP address(not suggested)；...
  • Page 31 【TCP port】default is 34567； 【HTTP port】default is 80； 【high speed download】Network high speed download； 【Transfer policy】there are 3 policies, adaptive, quality preferred, fluency preferred. Base on different setting, code stream is auto-adjusted, adaptive is eclectic between quality and fluency, also considers Fluency preferred and adaptive is valid only when the extra fluency when the quality is not greatly influenced.

  • Page 32: Pppoe Setting

    4.4.4 Net service To config advanced network function, choose any item and double click it to config the parameters. 4.16 Net service 【PPPoE setting】...

  • Page 33: Ntp Setting

    Pic: 4.17 PPPOE Enabe：Tick means chosen, enable it firstly, then the setting is valid. Input user name and password that provided by ISP（Internet server provider）, save it and reboot device, after reboot, IPC will auto connect to network by the way of PPPoE, if it is successful【IP address】will be changed to the dynamic WAN IP that just get.
  • Page 34 4.19 EMAIL setting SMTP server：address of email server，can be IP address or domain name（if it is domain name, need to make sure the DNS is correct, then domain name can be correctly analyzed） Port: Email server port number.； SSL: Decide whether using Secure Socket Layer protocol to login； User Name: Apply the email server user name.
  • Page 35 Pic: 4.20 IP authority setting（black list） Pic: 4.21 IP authority setting（white list）...
  • Page 36 【DDNS】 Pic: 4.22 DDNS setting To analyze server via dynamic domain name, choose DDNS type Host domain name：Provide the domain name registered by DDNS； Server domain name：the domain name that analyze server； User name：Provide the account registered by DDNS. Password：Provide the password registered by DDNS.； When the DDNS is successfully configured and start, you can connect the domain name in the IE address column to visit.
  • Page 37 Pic: 4.23 FTP setting 【Enable】Click Enable,then all settings will be available 【Host IP】：IP address of FTP server； Domain Port of FTP,default 21 【Port】 【User Name】User name of FTP 【Password】Password of user 【Cryptonym】：tick means chosen, choose this, there is no need to set user name and password. 【Max File Length】Max length for upload files at every packed,default 128M 【Remote path】：the directory to upload file Remark：the user should have the authority to upload file to server firstly.

  • Page 38: Alarm Center

    Pic: 4.24 ARSP setting 【type】：choose DNS 【Enable】：tick means chosen, setting is valid only when it is enable. 【server IP】：IP address of DDNS server 【Port No】：port No of device, corresponding to the listen port of DDNS； 【User name】：the user name that for device to log-in DDNS； 【Password】：password for above user name 【upgrade period】：Time interval of device synchronously to DDNS.
  • Page 39 【Protocol】protocol type is GENERAL； means chosen, setting is valid only when it is enalbe 【Enable】tick 【Server IP】IP address of Alarm Server； 【Port No】Port No. of device 【Alarm report】tick means chosen, report alarm information to server 【Log report】tick means chosen, report log information to server 【Mobile monitor setting】...
  • Page 40 Pic 4.27 UPNP setting ，open UPNP function，setting is valid only when it is enable 【Enable】tick means chosen 【HTTP】：Route will automatically distribute HTTP port for the device, when IE viewing, it need this port； 【TCP】：Router will automatically distribute TCP port for the device, when monitoring via CMS, it need this port.
  • Page 41 Pic: 4.28 GUI display 【Channel Name】Click the channel name modify button and enter the channel name menu. Modify the channel name. The 16 Chinese characters and 25 letters are supportive. 【Time title】tick ； means chosen, to shows the system time on monitoring page 【channel title】tick means chosen, show channel No at monitoring page.
  • Page 42 ，enter related channel, user can use mouse to choose any size of cover region, (the covered region, video output should be in black) 【Time title】与【Channel title】set time title and channel title whether need be show out and the position to show. Pic: 4.29 region cover setting...
  • Page 43 Pic: 4.30 Channel and time title setting 4.4.6 RS232...
  • Page 44 Pic: 4.31 RS232 【Serial Port Function】Common serial port is used to debug and update program or set up specific serial port. 【Baud rate】Choose the corresponding baud rate length 【Data bits】Include 5-8 options. 【Stop bits】Include 2 options； 【Parity】Include odd, even, mark, space. 4.4.7 Camera parameter Pic: 4.32 camera parameter 【Expose】can choose automatic（0.1 milisecond-80 milisecond）, or manual（1/25，1/50，1/120，...
  • Page 45 【Porfile】can choose indoor or outdoor or auto, default is auto 【AE reference】can choose integers data between 0—100, default is 50； 【AGC】can choose on or off, limitation is between 0—100； 【Slow shutter】can choose none, low, medium, high, default is none. 【IR_CUT】can choose automatically switch or IR synchronous switch, default is automatically switch ,means enable the convert of left and right of monitoring page 【Mirror image】tick...
  • Page 46 Pic: 4.33 HDD manage 4.5.2 Account Manage the user authority of this device Remark：1. The character length is 8 bytes at most for the following user and user team name. The blank ahead or behind the character string is invalid.The middle blank in the character string is valid. Legal characters include: letter, number, underline, subtraction sign, dot.
  • Page 47 Pic: 4.34 Account 【Modify User】Modify the existed user attribute. 【Modify Group】Modify the existed team attribute. 【Modify Password】Modify the user password. You can set 1-6 bit password. The blank ahead or behind the char string is invalid. The middle blank in the char string is valid, Note：The user who possess the user control authority can modify its own or other users password Pic: 4.35 Modify password...
  • Page 48 user name and password. Choose the team and choose whether cover using the user. Cover using means that the account can be used by multiple users at the same time. Once choose the team the user purview is the subclass of the team. We recommend that the common user’s purview is lower than the advanced user.
  • Page 49 Pic: 4.37 add group 【Delete user】Delete the current user. Choose the user and click delete user button. 【Delete Group】Delete the current group. Choose the group and click delete group button. Pic: 4.38 delete group 4.5.3 Auto-maintain The user can set the auto reboot time and auto file deleting time limit.
  • Page 50 Pic: 4.39 auto maintain 4.5.4 Default The system restore to the default setup. You can choose the items according to the menu.
  • Page 51 Pic: 4.40 default...

  • Page 52: Device Info

    4.5.5 Upgrade Pic: 4.41 system upgrade 【upgrade file】to select upgrade file via IE or client software to do upgrading. 4.5.6 Reboot To do soft reboot of IP camera 4.6 Device info Shows information of device, including：HDD info、Log , Version 4.6.1 HDD Info Display the hard disk state: type, overall capability, residual capability, the recording time and so on.。...
  • Page 53 Pic: 4.42 HDD info Tips ： means that the hard disk is normal. X means that the hard disk is broken-down.- means that there is no hard disk. If the user need to change the damaged hard disk, you must shut down the DVR and take up all the damaged hard disks,then install a new one.
  • Page 54 Pic: 4.43 Log info 4.6.3 Version Display the basic information such as hardware information, firmware version, built date , serial No. and so on.
  • Page 55 Pic: 4.44 version info...
  • Page 56 Chapter 5 Basic operations for cloud Cloud technology surveillance Cloud technology, which uses the serial number to get access to the device, not only enables the device one step on net but also greatly brings convenience for customers to better monitor via wide area network.
  • Page 57 Pic 5.1.1&5.1.2 Cloud ID interface  Log in cloud server Enter http://xmeye.net to see below log.There are two ways to login: by user and by device, user can log in freely based on their needs. *Note: To log in by user, user needs to register at the first time. Pic 5.2 Cloud login interface ...
  • Page 58 Pic 5.4 device management interface Pic 5.5 add interface at device manage Note:in pic 5.5, the user name means the user name of monitored device, password means the password of corresponding user. My Device Mainly show all the added devices, click a device name which is successfully connected to the server can get access to the monitor.
  • Page 59 Pic 5.6 monitor page - log in by user Note:the icon of means offline, the device doesn’t connect to server successfully.  Log in by device Pic 5.7 log in by device interface...
  • Page 60 Input the serial number of device and the verify code to monitor and control the device directly. Pic: 5.8 monitor page - log in by device Chapter five: FAQ & Maintaince 5.1 FAQ and answer If the problem u meet is not included in below items, please contact to local technical support or call customer service of headquarter, we will whole-heartedly serve for you.
  • Page 61 address is overlap, etc. c. got image from analog output but can not search IP address, then to check web connection interface can not search IP, also analog output do not check power, can investigate via network indicator. Q：IPC reboot after power off, using CMS to access, but failed, can not find device. A：when the device is under rebooting, need use CMS to connect it after a while when it is finish rebooting.
  • Page 62 A：1. Language setting in regular is regarding the web side, not related to CMS 2.CMS client side config – language in regular config is to set language of CMS 16. Q：Camera can not control the connect PTZ A：Client side PTZ config protocol, address etc should be same as connected PTZ 17.
  • Page 63 How to add wireless IP camera 1. Find General_CMS software from the CD, and install it on computer 2. Connect the camera with internet cable and power 3. Open CMS , click “system-Device manager “ to add the device . Click “ADD AREA ”to add one zone , name the zone yourself .
  • Page 64 Click “ADD DEVICE ” -”IP Search ”, after you search out the IP address , then you click “OK”to save . Return preview interface, Click the IP address , then you will find channel below the IP address . Click “CAM01” to connect the camera successfully .
  • Page 65 4. After you finish adding , then config the device as below photo, Right click the mouse - Device config Click NetService...
  • Page 66 Click wifi to config the wifi Search out the wifi signal to add it , then click ok to save. Quit the menu setting , move away the internet cable . Use the CMS to re-search and add the IP address of wireless camera . Finish config. (Refer Step 3 )
  • Page 67 How to to to to add camera camera with with mobile mobile phone phone phone : : : : add the the camera camera with with mobile mobile phone 1. Download the software “XMeye” and install it into mobile phone 2.
  • Page 68 Add the device successfully , then click the device, access the device successfully .
  • Page 69 Fcc Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Table of Contents