1. Manuals
  2. Brands
  3. RayLED Manuals
  4. Camera Accessories
  5. raymax 25 poe
  6. Installation manual

RayLED raymax 25 poe Installation Manual

Illuminators infra-red series
Hide thumbs
1
2
3
4
5

Advertisement

Table of Contents

MAX 25 PoE
illuminators installation guide
This installation guide provides instructions for installing the RAYMAX 25 IP
series illuminators.
Installation Steps
Overview
1. Mount Illuminator
2. Connect Power
Set Up Steps
1. Optional night set-up for optimum
image performance
2. Adjust vertical angle
3. Tighten all fixings

Package Contents

1. Illuminator with Integrated PSU
RAYMAX 25 IP illuminator
Integrated PSU
(back of illuminator)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the raymax 25 poe and is the answer not in the manual?

Questions and answers

Summary of Contents for RayLED raymax 25 poe

  • Page 1: Package Contents

    MAX 25 PoE illuminators installation guide This installation guide provides instructions for installing the RAYMAX 25 IP series illuminators. Installation Steps Overview 1. Mount Illuminator 2. Connect Power Set Up Steps 1. Optional night set-up for optimum image performance 2. Adjust vertical angle 3.
  • Page 2 Standard U Bracket LED illuminator Telemetry Control Power Indicator - telemetry input requires zero volt latched input, non Power On polarity sensitive Power adjust PoE Input P-cell 12V DC adjust 24V AC/DC (Optional input instead of PoE) 1.5m Install Install in a well Do not continually internally only ventilated area...

  • Page 3: Installation

    Installation InTERnAL USE OnLY Mount illuminator Connect Power Set Up TARGET 1 Optional night set-up for optimum image performance Adjust vertical angle Tighten all fixings Use wall bracket if you require horizontal adjustment. Match illumination to camera field of view Camera Camera Light...

  • Page 4: Technical Drawings

    Technical Drawings (not to scale) Standard Bracketry Optional Bracketry 8.5mm (0.3”) 48mm (1.9”) 25mm 23.5mm (1”) (0.9”) 47mm (1.9”) Wall Mount RM 25 IP Specifications InfRA-RED Series Adjustable Dimensions Input Output Photocell Weight Power L x W x D IEEE802.3af PoE or Compliant Interface Integrated...

  • Page 5: Troubleshooting

    Step 2: Set-up Camera, lens and illumination Check alignment of lamp Check camera lens – fully open at night & set correctly. Check model number to RayLED performance specification to ensure required distance is achievable. Step 3: Contact RayLED for further assistance note down: • Model, Angle and Wavelength versions + any options...

This manual is also suitable for:

Raymax 25 ip

Table of Contents