1. Manuals
  2. Brands
  3. GSM Manuals
  4. Thermostat
  5. Gecapp crono Wi-Fi
  6. Manual

GSM Gecapp crono Wi-Fi Manual

Wi-fi touch screen programmable thermostat
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GECA HAS DEVELOPED A SMARTPHONE/TABLET APP ABLE TO
GECA
HAS
INTERFACE IN A SIMPLE AND INTUITIVE MANNER TO THE
INTERFACE IN A SIMPLE AND INTUITIVE MANNER TO THE CONNECTED
CONNECTED DEVICES.
DEVICES. THE USER CAN CHECK AT ANY TIME THE STATUS OF THE
THE USER CAN CHECK AT ANY TIME THE STATUS OF THE
RELAYS AND CHANGE IT AS NEEDED.
TEMPERATURE AND
DEVELOPED
A
CHANGE IT AS NEEDED.
Download the App
Wi-Fi timer
Rep.1
SMARTPHONE/TABLET
APP
ABLE
TO

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Gecapp crono Wi-Fi and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GSM Gecapp crono Wi-Fi

  • Page 1 Wi-Fi timer Rep.1 GECA HAS DEVELOPED A SMARTPHONE/TABLET APP ABLE TO GECA DEVELOPED SMARTPHONE/TABLET ABLE INTERFACE IN A SIMPLE AND INTUITIVE MANNER TO THE INTERFACE IN A SIMPLE AND INTUITIVE MANNER TO THE CONNECTED CONNECTED DEVICES. DEVICES. THE USER CAN CHECK AT ANY TIME THE STATUS OF THE THE USER CAN CHECK AT ANY TIME THE STATUS OF THE RELAYS AND CHANGE IT AS NEEDED.

  • Page 3: Table Of Contents

    CONTENTS P.31 APP mode for op. system iOS PAGE 5 - The programmable thermostat PAGE 32 - Set up new device. PAGE 6 - General description PAGE 34 -Interface Home page App. - Power supply 230Vac-50/60 Hz PAGE 35 - Possible errors. PAGE 7 - Wiring REL1 - Add Smartphone/Tablet.
  • Page 5 Wi-Fi timer THE CHRONO...

  • Page 6: General Description

    N.B. BEFORE CONNECTING THE PROGRAMMABLE THERMOSTAT GecApp crono Wi-Fi, CUT OFF THE MAINS VOLTAGE. Remove the two screws from the "Base" of the GecApp crono Wi-Fi and remove the RED COVER (if installed) to access the power supply terminals. N.B. The GecApp crono Wi-Fi programmable thermostat is powered at 230Vac-50/60Hz via terminals "L"...

  • Page 7: Ext Probe Connection

    Fig.3 EXT PROBE CONNECTION Gecapp crono Wi-Fi allows you to connect an external temperature probe 4-metre long (code 2.030.1037) to EXT PROBE terminals (M1) (Fig. 4). After connecting the external temperature probe, set the switch (S1 in Fig. 4) at the rear of the programmable thermostat to position Ext and set the type of PROBE in the Settings MENU ' of the programmable thermostat.

  • Page 8: Remote Input

    REMOTE INPUT GecApp crono Wi-Fi has a REMOTE input (M3) (Fig. 5) to which you can connect a device or system to know a specific event such as opening or closing of a valve, blockage of the boiler, an alarm ... etc.

  • Page 9: Mounting On Box

    (Fig.11). After about ten seconds, the display goes in STAND-BY mode (Fig. 12). Upon first start-up, the Wi-Fi module is off. Fig.10 Fig.11 Fig.12 Gecapp crono Wi-Fi has already stored a weekly schedule of temperatures which can be changed as needed (Fig.12).
  • Page 10 TEMPERATURE MEASURED INCREMENT OF SET TEMPERATURE HOUR of the DAY. -EXIT FUNCTION / PROGRAM (TOUCH) AND TEMPERATURE DIFFERENTIAL - ENABLE COPY DAILY PROGRAM (PRESSED) - SETTING OF DIFF. SWITCH (PRESSED) - ACCESS WEEKLY PROGRAMMING (TOUCH) - COPY DAILY PROGRAM (TOUCH) - Settings MENU(PRESSED) - INCREASE TEMPERATURE SLOWLY : VIEW PROGRAM SAVING (PRESSED)

  • Page 11: Display

    TEMPERATURE CHART PROGRAMMABLE THERMOSTAT DISPLAY. The programmable thermostat GecApp crono Wi-Fi features a temperature chart that shows a diagram composed of 24 columns representing the HOURS of the day. For every hour you can program two temperatures: -the temperature of the FIRST HALF HOUR (i.e. from 00:00 to 00:29) -the temperature of the SECOND HALF HOUR (i.e.

  • Page 12: Settings Menu

    Settings MENU To enter the Settings MENU from the programmable thermostat, press simultaneously the touch zone of the TEMPERATURE measured and the touch zone of the HOUR (Fig. 17). To scroll through the Submenus press the keys “ ” or “ ”.

  • Page 13: Signal Quality

    SIGNAL QUALITY The display of GecApp crono Wi-Fi shows the Signal quality symbol. It represents the "Quality of the signal" between the GecApp crono Wi-Fi programmable thermostat and the WI-FI network of your home. The signal quality can be:...

  • Page 14: Wi-Fi Submenu

    The word "On" and Signal quality will begin to flash (Fig. 21). If you have previously set up the GecApp crono Wi-Fi, it will connect to your Wi-Fi network set. After 5 seconds, GecApp crono Wi-Fi will return to the Home Page.

  • Page 15: Wi-Fi Setup

    Use the keys “ ” or “ ” to scroll until you reach the “ Set ” mode. To SET UP the GecApp crono Wi-Fi to the Wi-Fi network connection, press “ Conf ” (Fig.24) for 2 seconds. The word "Conf" and "Signal quality”...
  • Page 16 (Fig.24). The display will show the word "In It" (Fig. 25) indicating the start of the "RESET" procedure of the Wi-Fi network connection. Thereupon, the programmable thermostat GecApp crono Wi-Fi displays the Home page. Fig.27 Fig.28 To restore the connection to the Wi-Fi network, repeat the SETUP procedure.

  • Page 17: Aux (Auxiliary Relay)

    AUX (Auxiliary relay) From GecApp crono Wi-Fi you can ENABLE, DISABLE or SET to AUTOMATIC mode the AUX output (Auxiliary relay). From the HOME PAGE enter the Settings MENU by pressing simultaneously for 2 seconds the the touch area of TEMPERATURE measured and the touch area of the HOUR.
  • Page 18 Temperature correction Cort" is a function used in case you have an incorrect measurement of room temperature due to distracting elements such as convection heaters, refrigerators etc etc. GecApp crono Wi-Fi alows you to compensate the temperature measured by the programmable thermostat within a range of -5° to +5°...
  • Page 19 40) and the external probe "EXt" (Fig 41). To confirm press and hold for about 2 seconds the probe type "Int" or "EXt" to use. One flash will confirm the choice, then GecApp crono Wi-Fi will return to the Home page. Fig.39 Fig.40...

  • Page 20: Exit

    EXIT (exit the Settings menu) By pressing the word "Exit" for about 2 seconds, you will exit the Settings menu and return to the Home page (fig.45) Fig.45...

  • Page 21: Weekly Programming

    WEEKLY PROGRAMMING We recommend that you set the weekly programming before you set DAY and TIME. It is possible to go from STANDBY ON (Fig. 46) to the Home page (Fig. 47) by simply touching the display. Fig. Fig.47 Press one of the keys “ ”, “...

  • Page 22: Copy Function

    COPY FUNCTION The COPY FUNCTION allows you to copy the program set for a day to other days of the week. From the WEEKLY PROGRAMMING page, press and hold for about 2 seconds the touch area of HOUR (Fig. 54) until the word COPY appears on the screen (Fig. 55). LU MA LU L U Fig.54...

  • Page 23: Manual Program

    To activate the display, simply touch it. Fig. 64) to switch to MANUAL mode. Hold down for about 2 seconds the key The GecApp Crono Wi-Fi behaves now as simple room thermostat. By tapping “ ” or “ ” (Fig.65) you will increase or decrease the TEMPERATURE by 0.2°C in WINTER and SUMMERmode.

  • Page 24: Manual Program Timer

    MANUAL PROGRAM TIMER This feature allows the programmable thermostat GecApp Crono Wi-Fi to function in MANUAL mode for a period of time, maintaining the set temperature relating to the MANUAL program. At the end of the range set the programmable thermostat will return to the WEEKLY PROGRAMME.
  • Page 25 To turn the device off, hold the ON/OFF button (Fig. 72) for about 2 seconds. The appliance will switch to shutdown mode, disabling the system. When GecApp Crono Wi-Fi is off (OFF), only the HOUR and the TEMPERATURE measured are displayed, alternating with the worda OFF (Fig.73).
  • Page 26 LOCK WITH PASSWORD To activate the display, simply touch it. Press and hold for about 2 seconds the buttons “ ” “ and "(Fig. 75) until the desired PASSWORD setup interface appears on display (Fig. 76). “ ” Numbers represent the digits that make up the PASSWORD. To change the blinking digit use the buttons “...
  • Page 27 TEMPERATURE DIFFERENTIAL The TEMPERATURE DIFFERENTIAL is the activation range of the programmable thermostat centred on SET TEMPERATURE to reach. It is more or less large depending on the index of variability of the room temperature (size of the room and external factors). In WINTER mode “ " the thermostat activates the heating system when the temperature measured in the room: SET TEMPERATURE-SEMI_TEMPERATURE DIFFERENTIAL The heating system is turned off when the temperature measured in the room: SET...

  • Page 28: Technical Specifications

    CORRECT USE AND MAINTENANCE The programming interface is fully displayed on the front display. The pressure on the display, while using and programming, should be light and limited to the area planned for the specific function. If you find it difficult to touch the display, you can use a thin, non-metallic, tool. If you don't have a special pen you can use the back of a pencil, the plastic cap of a pen or a cotton swab.
  • Page 29 Notes..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
  • Page 31 APPLICATION...

  • Page 32: Set Up New Device

    - With Smartphone/Tablet connect to the network of the device called GecApp Crono Wi- Fi. If your Smartphone/Tablet fails to connect to the Wi-Fi “GecApp crono Wi-Fi” network, exit the “Setup” and run the “RESET of the Wi- Fi” module, as indicated below and then repeat the “Setup”...
  • Page 33 -Insert the data as shown in Figure 4. Device name Enter a name for the device (es. House). SSID Enter the name of the Wi-Fi network connection to which the programmable thermostat must be connected. You can press the key “ "...
  • Page 34 LIST OF DEVICES UPDATE TIME STATUS of GecApp Crono Wi-Fi STATUS of GecApp Crono Wi-Fi at your home with settings active at your home - Temperature measured 24.7°C 15:03 MERC Date and time set on the - Automatic Program Programmable Thermostat at - Winter mode home.

  • Page 35: Possible Errors

    The programmable thermostat will now be handled by the new device (Smartphone/Tablet) as well. ADD/DELETE THE DEVICE To add a new device (GecApp crono Wi-Fi, GecApp crono GSM or Telecontrol- lo GSM03 ) from the Home Page of your Smartphone/Tablet proceed as follows: “...

  • Page 36: Programmable Thermostat

    After a few seconds you will receive a push notification to confirm the STATUS. The STATUS of the Programmable Thermostat GecApp crono Wi-Fi is updated with the new settings. N.B. If the new STATUS settings are sent using the same Wi-Fi network to which is connected the Programmable thermostat, the communication will be almost instantaneous.
  • Page 37 For example: AUTOMATIC PROGRAM & WINTER MODE GecApp Crono Wi-Fi In the AUTOMATIC program, works as a programmable thermostat and runs the program set by the user in 24 hours of the day throughout the week. ” programming thermostat- To set the AUTOMATIC program “...
  • Page 38 6 - Return to the screen in Figure 12 by clicking on "Winter" where you will see all the settings made. If necessary, the programming of other days according to the procedure just described, then press the key " " to send to the GecApp crono Wi-Fi the new settings.
  • Page 39 Fig.12 Fig.13 Fig.14 The programmable thermostat at home will receive the new settings within a period of 15 seconds. Upon the successful update of settings on your Smartphone/Tablet you will receive a push notification like "Parameters updated successfully" On the display of your Smartphone/Tablet in the Home page, you will see a graph of temperatures just programmed.
  • Page 40 For example: MANUAL PROGRAM & WINTER MODE GecApp Crono Wi-Fi In the MANUAL program, works as a simple thermostat. To set the “ ” “ ” MANUAL program and the WINTER mode from the programmable thermostat- to/Tablet, proceed as follows:...
  • Page 41 TIMED MANUAL GecApp Crono Wi-Fi The TIMED MANUAL mode allows the programmable thermostat work in manual mode for a set period of time. The time period varies from a minimum of 1 Minute up to a maximum of 16 hours and 59 Minutes.

  • Page 42: Advanced Parameters

    (Open). After setting the Auxiliary relay press the key " " (Fig. 22) to send to the GecApp crono Wi-Fi the new settings. The programmable thermostat at home will receive the new settings within a period of 15 seconds. Upon successful update of settings on your Smartphone/Tablet you will receive a push notification like "Parameters updated successfully"...

  • Page 43: Remote Contact

    Maximum temperature and minimum temperature are two temperature thresholds that once exceeded, a push notification is sent. The push notification is sent to all users who are associated with the GecApp Crono Wi-Fi . Maximum temperature and minimum temperature by default are disabled.

  • Page 44: Antifreeze Temperature

    ”. 5 -Press the key “ " to send to the GecApp crono Wi-Fi the new settings. The Antifreeze temperature can be disabled by setting The programmable thermostat at home will receive the new settings within a period of 15 seconds approx.

  • Page 45: Problems/Solutions

    Problems/Solutions Problems Solution The programmable Check the Wi-Fi network coverage in the area of installation. • thermostat does not find the Wi-Fi network. • Check that the symbol Signal quality “ ” is not flashing: Prolonged and continuous search of the Wi-Fi network can lead to overheating of the Measured temperature Wi-Fi module of the Programmable thermostat.
  • Page 47 THE APPLICATION...

  • Page 48: Set Up New Device

    - With Smartphone/Tablet connect to the network of the device called GecApp Crono Wi-Fi. If your Smartphone/Tablet fails to connect to the Wi-Fi “GecApp crono Wi-Fi” network, exit the “Setup” and run the “RESET of the Wi- Fi” module, as indicated below and then repeat the “Setup”...
  • Page 49 -Insert the data as shown in Figure 4. Device name Enter a name for the device (es. House). SSID Enter the name of the Wi-Fi network connection to which the programmable thermostat must be connected. You can press the key “ "...
  • Page 50 LIST OF DEVICES UPDATE TIME STATUS of GecApp Crono Wi-Fi STATUS of GecApp Crono Wi-Fi at at your home home with active settings - Temperature measured 24.7°C 15:03 MERC Date and time set on the - Automatic Program Programmable Thermostat at - Winter mode home.

  • Page 51: Possible Errors

    The programmable thermostat will now be handled by the new device (Smartphone/Tablet) as well. ADD/DELETE THE DEVICE To add a new device (GecApp crono Wi-Fi, GecApp crono GSM or Remote Controlo GSM03 ) from the Home Page of your Smartphone/Tablet proceed as follows: “+...
  • Page 52 After a few seconds you will receive a push notification to confirm the STATUS. The STATUS of the Programmable Thermostat GecApp crono Wi-Fi is updated with the new settings. N.B. If the new STATUS settings are sent using the same Wi-Fi network to which is connected the Programmable thermostat, the communication will be almost instantaneous.
  • Page 53 For example: AUTOMATIC PROGRAM & WINTER MODE GecApp Crono Wi-Fi In the AUTOMATIC program, works as a programmable thermostat and runs the program set by the user in 24 hours of the day throughout the week. To set the AUTOMATIC program “...

  • Page 54: Weekly Program

    6 -Return to the screen in Figure 12 pressing the key " "to display all the settings made. If necessary, the programming of other days according to the procedure just described, then press the key " " to send to the GecApp crono Wi-Fi the new settings.
  • Page 55 Fig.12 Fig.13 Fig.14 The programmable thermostat at home will receive the new settings within a period of 15 seconds. Upon the successful update of settings on your Smartphone/Tablet you will receive a push notification like "Parameters updated successfully". On the display of your Smartphone/Tablet in the Home page, you will see a graph of temperatures just programmed.
  • Page 56 For example: MANUAL PROGRAM & WINTER MODE GecApp Crono Wi-Fi In the MANUAL program, works as a simple thermostat. To set the MANUAL program “ “ and the WINTER mode “ “of the programmable thermostat / Tablet, proceed as follows:...
  • Page 57 TIMED MANUAL GecApp Crono Wi-Fi The TIMED MANUAL mode allows the programmable thermostat work in manual mode for a set period of time. The time period varies from a minimum of 1 Minute up to a maximum of 16 hours and 59 Minutes.

  • Page 58: Advanced Parameters

    A u t o status of the programmable thermostat will be as follows: • If the GecApp Crono Wi-Fi is ON the Auxiliary relay will be ON (Closed). • If the GecApp Crono Wi-Fi is OFF the Auxiliary relay will be OFF (Open).

  • Page 59: Remote Contact

    Maximum temperature and minimum temperature are two temperature thresholds that once exceeded, a push notification is sent. The push notification is sent to all users who are associated with the GecApp Crono Wi-Fi . Maximum temperature and minimum temperature by default are disabled.

  • Page 60: Antifreeze Temperature

    4 - Store the Anti-freeze Temperatura by pressing “ 5 - Press “ SEND” to send to the GecApp crono Wi-Fi the new settings. The Antifreeze temperature can be disabled by pressing on The programmable thermostat at home will receive the new settings within a period of 15 seconds.

  • Page 61: Problems/Solutions

    Problems/Solutions Problems Solution The programmable • Check the Wi-Fi network coverage in the area of installation. thermostat does not find the Wi-Fi network. • Check that the symbol Signal quality “ ” is not flashing: Prolonged and continuous search of the Wi-Fi network can lead to overheating of the Measured temperature Wi-Fi module of the Programmable thermostat.
  • Page 62 Notes..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
  • Page 63 Notes..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
  • Page 64 Tecnocontrol Srl GECA Srl Via Miglioli, n°47 20090 Segrate (MI) Via E. Fermi, n°98 25064 Gussago (BS) Italy Ph. +39 02 26922890 Italy Ph. +39 030 3730218 www.tecnocontrol.it www.gecasrl.it The manufacturer reserves the right to make any change it deems necessary, either aesthetic or functional, at any time and without prior notice.

Table of Contents