IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that product heat.
Page 3
20. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 21.
COMPLIANCE WITH FCC REGULATIONS FCC ID: RQU-HF630PB This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Should any trouble occur, remove the power source and refer servicing to qualified personnel. BATTERY INSTALLATION The battery compartment is located on the back of the remote control. Remove the battery compartment door by pressing in on the tab and lifting it off. Insert two (2) AAA size batteries (not included) into the battery compartment as the polarity markings inside the battery compartment.
LISTENING TO RADIO MANUAL TUNING 1. PRESS “FUNCTION” BUTTON (17) TO SELECT TUNER. 2. TUNE TO THE REQUIRED STATION BY PRESSING THE TUNING UP OR DOWN BUTTON (22,12). 3. ADJUST VOLUME KNOB (19) TO THE DESIRED VOLUME LEVEL . AUTO TUNING PRESS “FUNCTION”...
SKIP MODE (SKIP UP /SKIP DOWN DURING PLAY OR PAUSE MODE, IF SKIP UP BUTTON (22) IS PRESSED IT WILL GO TO NEXT TRACK AND DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE. DURING PLAY OR PAUSE MODE, IF SKIP DOWN BUTTON (12) IS PRESSED. IT WILL GO BACK TO THE BEGINNING OF THE TRACK, ORIGIANL TRACK NO.
MORE FEATURES A. SLEEP SETTING 1. PRESS & HOLD THE “ SLEEP ” BUTTON ON REMOTE CONTROL, TO ACTIVE & ADJUST THE SLEEP TIMER IN THE ORDER OF 90 > 80 >70….10 MINUTES AUTOMATICALLY. 2. SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING. 3.
Page 10
REMOTE CONTROL TRANSMITTER CONTROL FUNCTIONS BATTERY INSTALLATION (BATTERY NOT PROVIDED) THE INFRA-RED TRANSMITTER REQUIRE 2 PCS “ AAA “ BATTERY FOR OPERATION BUTTON DESCRIPTION POWER PRESS TO SWITCH THE SYSTEM INTO STANDBY MODE FUNCTION PRESS TO SELECT DIFFERENT FUNCTION MODE CLK-ADJ/MEMORY IN STANDBY MODE : PRESS TO ACTIVE CLOCK SETTING IN TUNER MODE : PRESS TO PRE-SET RADIO MEMORY...
SPECIFICATION Power Requirement Main unit: AC120V~ 60Hz Remote control 2 x 1.5V “AAA” size batteries (not included) Frequency Range Radio Band FM 87.5 ~ 108 MHz Output Power Speaker (RMS): 2x40 Watts Subwoofer (RMS): 2x50 Watts Total P.M.PO: 800 Watts USB Port Charging Port: 5V/2.1A...
Need help?
Do you have a question about the iTrack BT9279MO and is the answer not in the manual?
Questions and answers