1. Manuals
  2. Brands
  3. Intracom Manuals
  4. Wireless Access Point
  5. 525800
  6. User manual

Intracom 525800 User Manual

High-power ceiling mount wireless 300n poe access point
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
High-Power Ceiling Mount Wireless
300N PoE Access Point
User manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 525800 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Intracom 525800

  • Page 1 High-Power Ceiling Mount Wireless 300N PoE Access Point User manual...

  • Page 2: Table Of Contents

    300M High Power Wireless Ceiling AP Version 1.0 | 7/15/2015 Table of Content Chapter 1 Product Introduction ................1 1.1 Product Features ................... 1 1.2 Package Contents ..................1 1.3 Hardware Description ................... 2 Chapter 2 Hardware Installation Wizard ............. 3 Chapter 3 Configuration Management ..............
  • Page 3 300M High Power Wireless Ceiling AP 4.4.1.1 LAN......................24 4.4.1.2 WAN ......................26 4.4.2 Wifi ........................30 4.4.2.1 Radio0: Master "OpenWrt"..............32 4.4.3 DHCP and DNS ....................34 4.4.4 Hostnames ......................38 4.4.5 Static Routes ....................... 38 4.4.6 Diagnostics ......................39 4.4.7 Firewall.........................

  • Page 4: Chapter 1 Product Introduction

    300M High Power Wireless Ceiling AP Chapter 1 Product Introduction The 300M High Power Wireless Ceiling AP is based on 802.11n standard, using MIMO, OFDM technology, provides a wireless data transmission rate up to 300Mbps; using high power PA design of wireless power up to 400mW, long distance transmission and provide greater coverage simultaneously has signal strong penetration force;...

  • Page 5: Hardware Description

    300M High Power Wireless Ceiling AP 1.3 Hardware Description Ethernet Port: Ethernet port jack (RJ45). For wired Ethernet connection, and PoE -powered devices to be powered by the port to the AP. Power Interface: When the Ethernet does not support the PoE power supply, the port can be connected to DC12V/1A power supply adapter.

  • Page 6: Chapter 2 Hardware Installation Wizard

    300M High Power Wireless Ceiling AP Chapter 2 Hardware Installation Wizard 1. The AP chassis are placed on the wall or the ceiling, with mark pen mark hole fixed position, and then drilling. 2. AP chassis with screws is fixed on the wall or the ceiling. 3.

  • Page 7: Chapter 3 Configuration Management

    300M High Power Wireless Ceiling AP Chapter 3 Configuration Management 3.1 Set Network Configuration 1. On your computer desktop, right click "My Network Places" and select "Properties". 2. Right click "local Area Network Connection" and select "Properties". 3. Select "Internet Protocol(TCP/IP)" and click "Properties".
  • Page 8 300M High Power Wireless Ceiling AP 4. Select "Use the following IP address(s)" and "Use the following DNS server address". Click "OK". IP address: 192.168.10.XXX: ( XXX is a number from 1~253) Subnet mask: 255.255.255.0 Default gateway: 192.168.10.254 Preferred DNS server: 192.168.10.254 Click "OK"...

  • Page 9: Login Device Management Interface

    300M High Power Wireless Ceiling AP Note: IP address set here is only for entering the AP management page to set specific IP address setting, please refer to the actual use of the environment. 3.2 Login Device Management Interface 1. Connect to the AP through a wireless network or wired network. 2.

  • Page 10: Chapter 4 Function Deployment

    300M High Power Wireless Ceiling AP Chapter 4 Function Deployment 4.1 Status Click on "Status", you can see the Overview, Firewall, Routes, System Log, Kernel Log, Processes, Realtime Graphs options. 4.1.1 Overview Click on the "Status>Overview" option, you can see the following interface. Through this interface, you can learn "System"...

  • Page 11: Firewall

    300M High Power Wireless Ceiling AP 4.1.2 Firewall Click on the "Status>Firewall" option, you can see the following interface. Through this interface, you can know what is allowed by the packet, which is filtered packets. 4.1.3 Routes Click on the "Status>Routes" option, you can see the following interface. Through this interface, you can learn the relevant information systems active connections: IP address, MAC address, and gateway.

  • Page 12: Kernel Log

    300M High Power Wireless Ceiling AP Through this interface, you can get information link establishment fails, the packet filter log information, etc. through the log. By logging on to the log host, the system administrator can understand the log events for log analysis. Logs can help administrators locate faults, troubleshooting, can also help administrators to manage network security.

  • Page 13: Realtime Graphs

    300M High Power Wireless Ceiling AP Through this interface, you can understand the process of running the system and their status information. And its suspended, closed, forced to close operations. 4.1.7 Realtime Graphs Click the "Status> Realtime Graphs" option, you can see the Load, Traffic, Wireless and Connections options.

  • Page 14: Wireless

    300M High Power Wireless Ceiling AP 4.1.7.3 Wireless Click the "Status>Realtime Graphs>Wireless" option, you can see the following screen in Realtime Wireless information. 4.1.7.4 Connections Click the "Status>Realtime Graphs>Connections" option, you can see the following screen in Realtime Connections information.

  • Page 15: System

    300M High Power Wireless Ceiling AP 4.2 System Click on "System", you can see the System, Administration, Software, Starup, Scheduled Tasks, LED Configuration, Backup/Flash Firmware, Reboot options. 4.2.1 System Click "System>System" option, you can set the System Properties and Time Synchronization.

  • Page 16: Administration

    300M High Power Wireless Ceiling AP System log buffer size: You can specify the size of the log buffer here. External system log server: remote host is configured to receive log information machine. External system log server port: configured to receive a remote host machine’s port log information.
  • Page 17 300M High Power Wireless Ceiling AP Router Password Router Password settings interface as shown below. Password: You can modify the registry Router's password in this column, the default password is blank. Confirmation: Enter your password again. Click the "Save & Apply",Save your router's password. SSH Access SSH Access settings interface as shown below.

  • Page 18: Software

    300M High Power Wireless Ceiling AP SSH: Secure Shell SSH abbreviation for the establishment in the application layer and the transport layer on the basis of security protocols. SSH is more reliable, designed to provide security protocol for remote login session, and other network services. SSH protocol can effectively prevent the use of remote management process of information disclosure issue.

  • Page 19: Startup

    300M High Power Wireless Ceiling AP If this AP does not tftpd-hpa server proceed as follows. Enter "tftpd" in the "Download and install the package", click "OK" to. If this AP has tftpd-hpa server proceed as follows. In the "Filter" which enter "tftpd", click on "Find packages" in the "Status" box below to show the current OpenWrt support packages and find you need, click the "install"...

  • Page 20: Scheduled Tasks

    300M High Power Wireless Ceiling AP Start the project when the system is switched on in the foreground or the background programs running. You can enable or disable installed init scripts here. Change will applied after a device reboot. Different starup scripts start with different priorities, starup scripts can be Enable/Disable, Start, Restart and Stop operations.

  • Page 21: Led Configuration

    300M High Power Wireless Ceiling AP You can fill you want to accomplish in the box, especially repetitive tasks. Example: Yon want to restart the AP every night at 21.30(OpenWrt), would enter in the box "30 21 * * * /usr/local/etc/rc.d/OpenWrt restart". 4.2.6 LED Configuration Click on the "System>LED Configuration"...
  • Page 22 300M High Power Wireless Ceiling AP Download backup: This feature can be set up the AP as files stored in the computer to prepare for the next use; AP software upgrade or a new configuration file before loading the original backup AP configuration, software upgrades can effectively prevent or load the new configuration file is lost during the original configuration issues.

  • Page 23: Reboot

    300M High Power Wireless Ceiling AP Click "Open list", you can see a list of files to be backed up, The configuration file contains the changes necessary foundation files and user-defined files to be backed up. 4.2.8 Reboot Click on the "System>Reboot" option, you can see the following interface. Click "Perform reboot"...
  • Page 24 300M High Power Wireless Ceiling AP Dynamic DDNS: Its main function is to achieve a fixed domain name to resolve dynamic IP address. If the address of the AP's WAN port IP address is dynamically acquired through this feature allows access to other hosts on the Internet AP or virtual server with a fixed domain approach.

  • Page 25: Upnp

    300M High Power Wireless Ceiling AP Password: Password used when applying dynamic domain name. Source of IP address: The IP address of your Internet possible source URL, or network interface. 4.3.2 UPNP Click on the "Services>UPNP" option, you can see the following interface. Universal Plug and Play(UPnP) is an architecture for PC and smart devices(or equipment) common peer network connections, especially in the home.
  • Page 26 300M High Power Wireless Ceiling AP Start UPnP and NAT-PMP service: Check this box is switched on when this feature is enabled. Enable UPnP functionality: Check this box is switched on when this feature is enabled. Enable NAT-PMP functionality: NAT-PMP is to allow private network inside the device and routing communication to external devices and it can contact, based on UDP protocol.

  • Page 27: Network

    300M High Power Wireless Ceiling AP Internal addresses: Shows the need for a LAN host IP address port translation. Internal Ports: Displays the port needs to be converted LAN host port number. Action: Allow(allow) or reject(deny) access the internal or external network. 4.4 Network Click on “Network”, you can see the Interfaces, Wifi, DHCP and DNS, Hostnames, Static Routes, Diagnostics, Firewall and QoS options.
  • Page 28 300M High Power Wireless Ceiling AP Common Configuration Common Configuration screen as shown below. On this page you can set IP address and netmask. Yon can manage the AP via this IP address. If you share access for ordinary family, you do not need to change the IP address of the LAN port, keep the default value.

  • Page 29: Wan

    300M High Power Wireless Ceiling AP change the net-mask. Yon can choose different types of LAN net-mask according to the actual IP address types. IPv4 gateway: Enter this AP on the LAN gateway. The default is 192.168.1.1. Use custom DNS servers: DNS address provided by your ISP, if not provided, the default is 192.168.1.1.
  • Page 30 300M High Power Wireless Ceiling AP Expand Agreement are: Static address, DHCP client, PPPOE. Static address If you select the "static address" protocol, please complete the following information to suppliers(ISP)requirements. Click "Save&Apply" button, the next step is set.
  • Page 31 300M High Power Wireless Ceiling AP Ipv4 address: The AP's IP address on the WAN. Please enter the public IP address provided by your ISP. Ipv4 netmask: The net-mask for the WAN AP. Please enter the Net-mask provided by your ISP. Ipv4 gateway: Please fill in the gateway provided by your ISP.
  • Page 32 300M High Power Wireless Ceiling AP Use DNS servers advertised by peer: Check the DNS server address in the fill blank are ignored at the advertised DNS server address. Use gateway metric: The destination network midway take several segments, that is, how many APs through.

  • Page 33: Wifi

    300M High Power Wireless Ceiling AP PAP/CHAP username, PAP/CHAP password: Please enter your ISP username and password. Access Concentrator: input connector center terminal, computer or communications device connection point device. Leave empty to autodetect. Service Name: Enter the name of your broadband connection, leave empty to autodetect. Use default gateway: Check in at the gateway to fill empty default route is not configured.
  • Page 34 300M High Power Wireless Ceiling AP If you want to join the SSID as "AP" in the network, according to the following steps to configure. Step 1: first determine the IP "AP" where(for example 192.168.1.2), encryption(WPA), channels(6 channels). Then modify your AP’s LAN port IP, must be "AP" in the same subnet(192.168.1.X), encryption, channel must also be "AP"...

  • Page 35: Radio0: Master "Openwrt

    300M High Power Wireless Ceiling AP address, IP address, signal, noise, transmission rate and receive rates and other information. 4.4.2.1 Radio0: Master "OpenWrt" Click the "Network>Wifi>Radio0: Master "OpenWrt" option, Device Configuration and Interface Configuration can be configured. Device Configuration Device Configuration is divided into General Setup and Advance Settings. Click on the "General Setup"...
  • Page 36 300M High Power Wireless Ceiling AP Mode: Wireless AP is used to set the operating mode "automatic", "802.11b", "802.11g", "802.11g+n" four modes, we recommend that you select "802.11g+n", spread faster, more transmission range wide. HT mode: "20MHZ", "40MHZ HT40-", “40MHZ HT40+” modes. Country Code: Yon can select the desired country code from the drop-down list.

  • Page 37: Dhcp And Dns

    300M High Power Wireless Ceiling AP requires hardware(mobile phones, laptops, etc.)are required to support it can ba linked successfully. Click on the "Wireless Security" option, you can see the following interface. Encryption: The AP provides a "WEP Open System/Shared Key", "WPA-PSK/WPA2 -PSK", "WPA-EAP/WPA2-EAP", "WPA-PSK/WPA2-PSK Mixed Mode"...
  • Page 38 300M High Power Wireless Ceiling AP Server Settings Dnsmasq for NAT firewall provides an integrated DHCP server and DNS forwarder. Click on "General Settings" screen as shown below. Domain required: Enable DNS names are not forwarded no resolution requests. Authoritative: unique within the network DHCP server. Local server: the local domain rule, never forwarded and processed only from the local DHCP or HOSTS file name data.
  • Page 39 300M High Power Wireless Ceiling AP DNS server. Rebind protection: Enable RFC1918 up link response data is discarded. Allow localhost: Enable the Allow up link response within 127.0.0.0/8 loop range, for Example: RBL services. Domain Whitelist: Enter the allowed domain list RFC1918 response. Click the "Resolv and Hosts Files", there may be the following interface.
  • Page 40 300M High Power Wireless Ceiling AP Click on the "Advanced Settings" screen may appear as follows. Filter private: no forwarding enabled local network lookups reverse lookup command. Filter useless: Public domain name server is not enabled unable to respond to requests forwards.

  • Page 41: Hostnames

    300M High Power Wireless Ceiling AP with a corresponding lease are served. Use the Add Button to add a new lease entry. The MAC-Address identifies the host, the IPv4-Address specifies to the fixed address to the Hostname is assigned as symbolic name to the requesting host.

  • Page 42: Diagnostics

    300M High Power Wireless Ceiling AP with you not in the same segment of the network. Target: Enter the network address of the destination network. IPv4-Netmask: Enter the netmask address of the destination network. IPv4-Gateway: Enter the gateway address that matches the destination network data delivery.

  • Page 43: Firewall

    300M High Power Wireless Ceiling AP If the interface appears as shown below, then you are not connected to a network of export. 3. Fill "www.baidu.com" In the third box, click on the "Nslookup" button. If the interface appears as shown below, then configure the correct DNS resolution. If the interface is shown there, the instructions to configure DNS resolution is not correct.
  • Page 44 300M High Power Wireless Ceiling AP General Settings Enable SYN-flood defenses: SYN Flood is currently the most popular DoS(Denial of Service Attack)with one of the DDoS(distributed denial of service attack)approach, which is a using TCP protocol flaw, sending a large number of forged TCP connection requests, thereby causing the attacker depletion of resources(CPU full load or insufficient memory) way to attack.
  • Page 45 300M High Power Wireless Ceiling AP Regional "newzone" General Settings Name: lan. Inbound and outbound data packet for setting "in" "out" AP(an interface) default. Forward: It refers to a specific(one or more) data packets between different subnets forwarding area. Masquerading: IP masquerading is a special kind of SNAT rule, when a computer within the network computers to access the external network through the AP, it replaces the source address of IP packets to a predetermined address(usually the external network card address).

  • Page 46: Port Forwards

    300M High Power Wireless Ceiling AP to this AP response packets can be correctly returned to the AP. (Otherwise, the network computer IP address 192.168.XXX.XXX, for external network servers, do not know how to return, or return to other computers go up.) MSS clamping: MSS value that is the largest data segment for each TCP packet can be transmitted.
  • Page 47 300M High Power Wireless Ceiling AP Click on the "Network>Firewall>Port Forwards" option, you can see the following interface. This interface provides configure port forwarding rules. When the network using a private address 10.X.X.X/172.16.X.X/192.168.X.X, external network can not access the network directly within the server.

  • Page 48: Traffic Rules

    300M High Power Wireless Ceiling AP common ports and services table Network Services Agreement Port telnet Smtp Time POP3 Snmp CS server 27015 4.4.7.3 Traffic Rules Click on the "Network>Firewall>Traffic Rules" option, you can see the following interface. Communication rules define the traffic transmitted between different regions, for example: some refuse to communications between the host and open to the WAN port.

  • Page 49: Custom Rules

    300M High Power Wireless Ceiling AP following interface configuration. Name: corresponds to add your name, such as aa. Restrict to address family: IPv4 and IPv6, only IPv4, only IPv6, any for you to choose, according to the traffic rules you want to add to choose. Protocol: Select the protocol based on your intranet server.

  • Page 50: Qos

    300M High Power Wireless Ceiling AP In this interface you can define some functions not included in the firewall so that the AP can play against the computer maximum protection. 4.4.8 QoS Click on the "Network>QoS" option, you can see the following interface. Download speed/Upload speed: To modify according to their actual broadband.

  • Page 51: Logout

    300M High Power Wireless Ceiling AP Target: There are the "priority", "express", "normal", "low" four options to choose from. In this example select "priority". Source host: Fill the local IP address. Destination host: Fill the destination IP to be controlled. Service: Choose one of your own network.
  • Page 52 300M High Power Wireless Ceiling AP may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna.

Table of Contents