1. Manuals
  2. Brands
  3. AsGa Manuals
  4. Switch
  5. LightBolt 28322-O1
  6. User manual

AsGa LightBolt 28322-O1 User Manual

Lightbolt 10gige
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AsGa LightBOLT
AsGa Light
BOLT 10GigE Switch
AsGa Light
AsGa Light
BOLT
BOLT
AsGa LightBOLT
AsGa Light
AsGa Light
AsGa Light
BOLT
BOLT 10GigE Switch
BOLT
User Guide
User Guide
User Guide
User Guide
User Guide
User Guide
User Guide
User Guide
10GigE Switch
10GigE Switch
10GigE Switch
10GigE Switch
10GigE Switch
10GigE Switch
Index
Index
Index
Index

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LightBolt 28322-O1 and is the answer not in the manual?

Questions and answers

Related Manuals for AsGa LightBolt 28322-O1

Summary of Contents for AsGa LightBolt 28322-O1

  • Page 1 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa LightBOLT AsGa Light AsGa Light BOLT BOLT 10GigE Switch BOLT 10GigE Switch 10GigE Switch 10GigE Switch User Guide...

  • Page 2: Table Of Contents

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch User Guide User Guide User Guide User Guide Index Index Index Index INDEX ............................4 NTRODUCTION ............................9 PECIFICATION ...........................9 YSTEM EFAULTS ...........................10 ONFIGURATION ........................10...

  • Page 3: Safety Warnings

    (ESD) and use a wrist strap when removing or inserting any card into the equipment. The information contained in this guide is AsGa’s property, and it is not authorized to publish, reproduce or to make any other use without written permission of AsGa.

  • Page 4: Introduction

    Upgrading to 10-Gigabit Ethernet is simple since the upgrade paths are similar to those of 1- Gigabit Ethernet. AsGa LightBOLT 10GigE switches offer a seamless path migration to your 10Gig solution, integrating in just one rack unit 24 1GigE electrical ports (two optical 1GigE combo port available) plus four 10GigE ports with an unparallel switching capacity: less than 3 microsecond switching time at full load.
  • Page 5 16K MAC Table. • 8K L3 IPV4 Table. • With LightBOLT switches, AsGa introduce AsGOS a compressive CLI (Command Line Interface) industry standard configuration. AsGOS come in the following packages: Full Layer 2 protocol support: IEEE 802.3ac – VLAN Tagging.
  • Page 6 L2 characteristics the LightBOLT family of switches Full Layer 3 support. AsGOS MC Extension (*): Full Layer 2; little Layer 3 package specifically adapted for provide • full management support to AsGa 1GigE Media Converters directly attached to Optical LightBOLT Family of switches.

  • Page 7: Front Panel

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch User Guide User Guide User Guide User Guide Introduction Introduction Introduction Introduction The following lines detail basic CLI standard commands available at the current AsGOS L2 version;...
  • Page 8 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch User Guide User Guide User Guide User Guide Introduction Introduction Introduction Introduction Position Designation RJ45 connector for notebook connection DB9 connector for notebook connection...

  • Page 9: Specification

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Specification Specification Specification Specification SPECIFICATION System Defaults switch’s system...

  • Page 10: Configuration

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration CONFIGURATION Command Line Interface This Guide attempts to make configuration simpler as possible; displaying all AsGOS command lines necessaries to configure LightBOLT series switches.

  • Page 11: Command Line Help

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Line Help The AsGOS CLI contains a text-based help facility. Access this help by typing in the full or partial command string then typing “?”.

  • Page 12: Command Abbreviations

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Abbreviations The AsGOS CLI accepts abbreviations for commands. For example: sh in Ge7 Is the abbreviation for the show interface command.

  • Page 13: Command Negation

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Negation Some commands can be negated by using a no keyword. Depending on the command or the parameters, command negation can mean the disabling of one entire feature for the AsGOS/switch or the disabling of that feature for a specific ID, interface or address.

  • Page 14: Connecting To The Switch

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration console port on the switch; or remotely by a Telnet or SSH connection over the network. For any remote operation you need to configure an IP management address.

  • Page 15: Configuring The Switch

    You will have the default prompt name witch will be “AsGa> “ witch indicate the normal Exec mode operation (or View mode). At this level you can enter at the configuration mode issuing the following commands:...
  • Page 16 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration COMMAND DESCRIPTION After connect your terminal you will be prompted for a user name and password.
  • Page 17 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration bridge-group instance 1 spanning-tree portfast...
  • Page 18 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration interface ge18 interface ge19 interface ge20...
  • Page 19 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration interface vlan1.4094 line con 0...
  • Page 20 Enter into configuration mode. AsGa#interface ge1 Enter into interface ge1 configuration mode. AsGa(interface)# Now you are into the interface configuration mode. AsGa(interface)# swtchport mode access Put the interface into the accces switch port mode. AsGa(interface)#end Exit from interface configuration mode. AsGa# wr Save the configuration.

  • Page 21: Creating Vlans

    Enter into configuration mode AsGa#interface ge1 Enter into interface ge1 configuration mode. AsGa(interface)# Now you are into the interface configuration mode AsGa(interface)# swtchport access Assign Pert Port VLAN ID to an access port. vlan 300 AsGa(interface)#end Exit from interface configuration mode...

  • Page 22: Displaying Vlan Information

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Include the VLAN as a Per port VLAN (PVID) to these port.

  • Page 23: Managing File System

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration COMMAND DESCRIPTION AsGa>config t Enter into configuration mode Enter into interface vlan1.1 configuration mode.
  • Page 24 TFTP transfer; to do it you need make available a TFTP server and issue the following commands: For copying from a TFTP server to system memory: AsGa# copy <TFTP server address> <file name> flash For copying to TFTP server: AsGa# copy <file name> <TFTP server address>...

  • Page 25: Configuring System Logs

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Startup: LightBolt-28322-E1-L2-AsGOS-1.0.0-RC4.bin Running: LightBolt-28322-E1-L2-AsGOS-1.0.0-RC4.bin Last Modified: Thu Apr 3 08:34:12 2036 System Image: Startup: LightBolt-28322-E1-L2-System-1.0.0-RC2.bin...

  • Page 26: Configuring Your Console Port

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Your file will be stored into RAM; if you need save it you need issue the following command:...
  • Page 27 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Start-character: Set the current start character used when software flow control mechanism is...

  • Page 28: Enabling Radius Server

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration SSH connection setting. 3.17 Enabling RADIUS Server...

  • Page 29: Configuring Snmp

    AsGOS# configure terminal Enter the Configure mode. Set the 192.168.1.1 as the server for receiving AsGOS# snmp-server manager 192.168.1.1 traps- traps with community name ASGA. Traps will be version 1 community ASGA send as SNMP traps version 1. AsGOS# snmp-server community ASGA rw remote Specify the community name and de IP address 192.168.1.1...

  • Page 30: Port Configuration

    View-Based Access Control Model (VACM) for SNMP. Tabela 3.1: SNMPv3 RFCs. AsGa LightBolt series switches cover all the subjects detailed into those RFC´s. The following example shows a typical SNMP V.3 configuration for a more detailed command description please refer to the alphabetic SNMP commands description.

  • Page 31: Configuring Ip Addresses On Switched Virtual Interfaces Svi´s

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration 6.2.1.3 Flow Control Use the flow control interface configuration command to set the receive or send flow-control value for an interface.

  • Page 32: Spanning Tree Configuration

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration AsgOS#show ip route Codes: C - connected, S - static, R - RIP, B - BGP...

  • Page 33: Setting The Aging Time

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration LightBolt#show mac-address-table VLAN address type interface 0000.C003.0102...
  • Page 34 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration 3.22.4 Denial of service attack prevention (DoS Prevention)
  • Page 35 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration 3.22.7 TCP fragment attack The attack consists of requesting a TCP connection fragmented into two IP packets. The first IP packet of 68 bytes only holds the 8 first bytes of the TCP header (source and destination ports and sequence number).
  • Page 36 E.g. the sending machine tells that it wount send anymore packets but can still receive packets by himself. AsGa LightBolt Switches has a hardware based built in mechanism to detect malicious control flag bit combinations. The detected combinations are: TCP SYN FLAG = 1 and Source Port <...
  • Page 37 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Under this setting the system will check for those malicious combinations.

  • Page 38: Appendixa

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration APPENDIX A Common Spanning Tree Protocol Commands All commands in this chapter can be used in the Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP) and Multiple Spanning Tree Protocol (MSTP) daemons.
  • Page 39 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Syntax bridge hello-time HELLOTIME no bridge hello-time HELLOTIME = <1-10>...
  • Page 40 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Examples AsGOS# configure terminal AsGOS(config)# bridge max-age 12 4.1.4 bridge priority...
  • Page 41 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Usage The BPDU guard feature shuts down the port on receiving a BPDU on a BPDU-guard enabled port.
  • Page 42 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Usage The Spanning Tree Protocol sends BPDUs from all ports. Enabling the BPDU Filter feature ensures that PortFastenabled ports do not transmit or receive any BPDUs.
  • Page 43 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration 4.1.9 bridge-group path-cost Use this command to set the cost of a path associated with a bridge-group. The lower the path cost, the greater the likelihood of the bridge becoming root.

  • Page 44: Stp Commands

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration 4.1.11 spanning-tree guard root Use this command to enable the Root Guard feature for the port. The root guard feature disables reception of superior BPDUs.
  • Page 45 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration AsGOS(config)# bridge shutdown 4 Related Commands bridge instance 4.2.2 bridge spanning-tree enable...
  • Page 46 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration AsGOS(config)# debug stp all AsGOS(config)# debug stp cli...

  • Page 47: Rstp Commands

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration RSTP Commands This chapter lists the commands that are exclusive to the Rapid Spanning Tree Protocol. For other commands useful in the RSTP, see the Common Spanning Tree Protocol Commands chapter.
  • Page 48 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration 4.3.3 clear spanning-tree detected protocols Use this command to clear the detected protocols for a specific bridge or interface.
  • Page 49 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Syntax show spanning-tree Command Mode Privileged Exec, Configure and Interface modes.

  • Page 50: Mstp Commands

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration AsGOS# configure terminal AsGOS(config)# interface eth0...
  • Page 51 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Default If this command is not used, Cisco interoperability is disabled.
  • Page 52 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Examples AsGOS# configure terminal AsGOS(config)# bridge 4 instance 3 priority 3 4.4.3 bridge instance vlan...
  • Page 53 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Default The default max-hops in a MST region are 20.
  • Page 54 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Default By default, each MST bridge starts with the region name as its bridge address. This means each MST bridge is a region by itself, unless specifically added to one.
  • Page 55 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Examples AsGOS# configure terminal AsGOS(config)# interface eth0 AsGOS(config-if)# bridge-group 4 instance 3 4.4.9 bridge-group instance path-cost...
  • Page 56 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Default The default value of port priority for each instance is 128.
  • Page 57 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Mode Exec, Privileged Exec and Configure modes...

  • Page 58: Command Syntax

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Usage The following show output displays the MSTP configuration information for bridge b.
  • Page 59 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration % eth1: Configured Path Cost 200000 - Add type Explicit ref count 2...
  • Page 60 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration % 1: CST Bridge Id 0000009027342b72...
  • Page 61 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration 4.4.18 spanning-tree link-type Use this command to enable or disable point-to-point or shared link types.

  • Page 62: Appendixb

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration APPENDIX B access-list Access List Masks •...
  • Page 63 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Syntax This command has no arguments.
  • Page 64 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Mode Interface Default All interfaces are set to auto as default command.
  • Page 65 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Mode Vlan database Default This command has no default values.
  • Page 66 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Mode Interface Usage Flowcontrol send on...
  • Page 67 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration AsGOS(config)# interface ge2 AsGOS(interface)# AsGOS# configure terminal AsGOS(config)# interface vlan1.200...
  • Page 68 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Mode Interface configuration Default...
  • Page 69 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration This command permit to freeze the learning process of the mac table. All mac address learned will persist until the no form of this command will be issue or a reboot process occurs.
  • Page 70 Trunk: Set the port to trunk unconditionally. The port is a trunking VLAN Layer-2 interface. The port transmits and receives encapsulated (tagged) frames that identify the VLAN of origination. A trunk is a point-to-point link between two switches or between a switch and a router. AsGa LightBolt switches use 802.1Q tag encapsulation method.
  • Page 71 Use the no form of this command to reset all of the trunking characteristics to the defaults. Use the no form with keywords to reset that characteristic to the defaults. The encapsulation method for AsGa switches is based on 802.1Q tagging.
  • Page 72 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Syntax switchport trunk [allowed vlan <allowed vlan ID list>]...
  • Page 73 Trunk: Set the port to trunk unconditionally. The port is a trunking VLAN Layer-2 interface. The port transmits and receives encapsulated (tagged) frames that identify the VLAN of origination. A trunk is a point-to-point link between two switches or between a switch and a router. AsGa LightBolt switches use 802.1Q tag encapsulation method.
  • Page 74 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration AsGos (interface ge16) switchport mode hybrid...
  • Page 75 Use the no form of this command to reset all of the trunking characteristics to the defaults. Use the no form with keywords to reset that characteristic to the defaults. The encapsulation method for AsGa switches is based on 802.1Q tagging. Command Syntax switchport trunk [allowed vlan <allowed vlan ID...

  • Page 76: Show Interface

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration 5.1.25 Speed Use the speed interface configuration command to specify the speed of a port. Use the no or default form of this command to return the port to its default value.

  • Page 77: Show Interfaces

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Examples AsGOS# show interface link...
  • Page 78 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Default No default for this command...

  • Page 79: Show Vlan

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Total Packets Received Not Forwarded...: 0 Total Packets Received Discarded....: 0...
  • Page 80 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Mode EXEC Default No Default for this command.
  • Page 81 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration 5.1.31 show traffic-class-table Use this command to display the data in the traffic class table.

  • Page 82: Storm Control

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Examples AsGOS# show user-priority interface eth0 Related Commands 5.1.33 Storm Control...
  • Page 83 LightBOLT(config)# snmp-server manager ip-address (traps-version ( 1 | 2c | 3 user username (auth | noauth | priv) | ) (community string | ) (upd-port port | ) Examples LightBOLT(config)# snmp-server manager 192.168.1.1 traps-version 1 community AsGa upd-port 162 LightBOLT(config)# snmp-server manager 192.168.1.1 traps-version 2c community AsGa upd-port 162 LightBOLT(config)# snmp-server manager 192.168.1.1 traps-version 3 user...
  • Page 84 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Examples LightBOLT(config)# snmp-server trap-source loopback 0 LightBOLT(config)# snmp-server trap-source LightBOLT(config)# snmp-server trap-source vlan1.400...
  • Page 85 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Related Commands 5.1.37 snmp-server community...
  • Page 86 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Usage snmp-server name name TEST...
  • Page 87 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Examples LightBOLT(config)# snmp-server location Rodovia Roberto Moreira KM4 Related Commands 5.1.41 snmp-server view...
  • Page 88 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Command Mode Exec mode Usage...
  • Page 89 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration 5.1.44 show snmp view Use This command to display how OIDs are assigned to different Views.
  • Page 90 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration 5.1.46 show log-files This command shows all log files stored in permanent memory.
  • Page 91 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Related Commands 5.1.48 show image-files...
  • Page 92 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration LightBolt#show mac-address-table interface ge2 VLAN...

  • Page 93: Vlan Database

    AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration 5.1.51 VLAN DATABASE Use the vlan database privileged EXEC command to enter virtual LAN (VLAN) configuration mode.
  • Page 94 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Related Commands bridge protocol ieee 5.1.53 vlan classifier...
  • Page 95 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Configuration Configuration Configuration Configuration Default No default Examples bridge 1 protocol mstp bridge 1 acquire vlan classifier rule 1 mac 0000.c004.0102 vlan 300...
  • Page 96 Installation INSTALLATION Recommendations for Unpacking and Stockpiling The AsGa switches are wrapped individually in cardboard boxes and appropriately accommodated through internal shims. The described packing is adapted for the following items: Piling up (as described on the box's external serigraph);...
  • Page 97 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Installation Installation Installation Installation Figure 6-1: Installation of 19” rack x 40 U.
  • Page 98 AsGa Light AsGa LightBOLT BOLT 10GigE Switch 10GigE Switch AsGa Light AsGa Light BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Installation Installation Installation Installation channel of optic fibers that should conduct them until DIO. The conduits can be fastened through plastic clamps.
  • Page 99 This product is guaranteed against production defects for a period of 12 months to count starting from the date of the product’s invoicing. In case a production defect has been verified, AsGa will decide on changing or repairing the defective equipment. transportation...
  • Page 100 AsGa L AsGa Light ightBOLT BOLT 10GigE Switch 10GigE Switch AsGa L AsGa L ight ight BOLT BOLT 10GigE Switch 10GigE Switch U U U U ser Guide ser Guide ser Guide ser Guide Warranty Warranty Warranty Warranty...

This manual is also suitable for:

Lightbolt 28304-e1Lightbolt 28304-o1Lightbotl 28522-o1Lightbolt 28504-o1Lightbolt 28504-e1

Table of Contents