Do you have a question about the 3030247600 and is the answer not in the manual?
Questions and answers
Summary of Contents for Muller Elektronik 3030247600
Page 1
Installation and Operating Instructions DGPS/GLONASS receiver AG-STAR Version: V7.20170405 3030247600-02-EN Read and follow these operating instructions. Keep these operating instructions in a safe place for later reference.
Contents Contents For your safety Basic safety instructions Intended use Layout and meaning of warnings Disposal Product description About the GPS receiver Meaning of the LED lights Mounting and configuration Mounting the GPS receiver Connecting the GPS receiver to a terminal Activating the driver of the GPS receiver on a terminal Configuring the GPS receiver Technical specifications...
This signal word identifies medium-risk hazards, which could potentially cause death or serious physical injury, if not avoided. CAUTION This signal word identifies hazards that could potentially cause minor or moderate physical injury or damage to property, if not avoided. 3030247600-02-EN...
For your safety Disposal NOTICE This signal word identifies hazards that could potentially cause damage to property, if not avoided. There are some actions that need to be performed in several steps. If there is a risk involved in carrying out any of these steps, a safety warning will appear in the instructions themselves.
▪ Absolute accuracy is the accuracy with which a movement can be repeated after days, months or years. An absolute accuracy of 2.5 cm means that the deviation of a movement after one year is a maximum of 2.5 cm. This maximum deviation 3030247600-02-EN...
Product description Meaning of the LED lights also applies if, after one year has passed, you use the field limits, guidance lines, obstacles, etc. in the TRACK-Leader application from the previous year. Meaning of the LED lights The GPS receiver has three LED lights, which display the current state of the GPS receiver.
4. Place the GPS receiver onto the magnetic plate so that it locks. The connection must thus face away from the direction of travel. ⇨ You have now mounted the GPS receiver onto the roof of the vehicle. ⇨ You can now connect the GPS receiver to a terminal. 3030247600-02-EN...
Mounting and configuration Connecting the GPS receiver to a terminal Connecting the GPS receiver to a terminal NOTICE Terminal connector supplying power Potential damage to the terminal from a short-circuit. ◦ Switch the terminal off before plugging in or removing the connector. Procedure This is how you connect the GPS receiver to a terminal: 1.
Page 10
▪ The internal correction increases path-to-path accuracy. ▪ 8 GPS satellites ▪ Higher number of available ▪ P-t-P: 25 cm GPS/GLONA ▪ 6 GLONASS satellites satellites. ▪ Abs.: 150 cm SS GLIDE 2 ▪ Internal GLIDE correction signal ▪ The internal correction 3030247600-02-EN...
Page 11
Mounting and configuration Configuring the GPS receiver Value Used satellites and correction sig- Advantages Accuracies nals increases path-to-path accuracy. P-t-P = path-to-path accuracy Abs. = Absolute accuracy Information for GLIDE If you have selected a correction signal with GLIDE, please note: ▪...
8 – 36 V DC Current consumption 208 mA at 12 V DC Power input 2.5 W GPS standard NMEA 0183 Configuration Frequencies 5 Hz (GPGGA, GPVTG) 1 Hz (GPGSA, GPZDA) Transmission rate 19200 baud Data bits Parity Stop bits Flow control None 3030247600-02-EN...
List of accessories List of accessories Complete GPS receiver package with cable Item number Item name 3030247600 DGPS/GLONASS receiver AG-STAR Connector cable to the terminal: 6m 3030247605 DGPS/GLONASS receiver AG-STAR Connector cable to the steering job computer GPS receiver with no connector cable...
Need help?
Do you have a question about the 3030247600 and is the answer not in the manual?
Questions and answers