Advertisement
HONGKONG UCLOUDLINK NETWORK
TECHNOLOGY LIMITED
4G Free Roaming Hotspot
E1
4G High Speed Internet
E1 connects to the 4G or 3G local network automatically. It will switch to the best and the
most stable network. This device only used for data communication without voice.
We are all connected
E1 supports up to 5 devices simultaneously. This allows all your Wi-Fi enabled devices
like smartphones, tablets and laptop computers assessing Internet at the same time.
Safe personal Wi-Fi
There is zero hacking and as well no surveillance. Use the private network service to
ensure online protection when accessing the Internet.
Power Bank
With the maximum capacity of 6000 mAh, GlocalMe acts as a power bank which
provides you with the extra convenience of charging your mobile phone .
Advertisement
Table of Contents
Related Manuals for GlocalMe E1
Summary of Contents for GlocalMe E1
- Page 1 4G Free Roaming Hotspot 4G High Speed Internet E1 connects to the 4G or 3G local network automatically. It will switch to the best and the most stable network. This device only used for data communication without voice. We are all connected E1 supports up to 5 devices simultaneously.
- Page 2 1. Product Overview ; 1. Wi‐Fi LED Indicator 2. Signal LED Indicator 3. Battery LED Indicator 4. Strength LED Indicator 5. Micro USB (Input) 6. Handle position for opening front panel 7. Power button 8. Reset button...
- Page 3 LED Indicator Type Status Remarks On Ready for internet connection Wi‐Fi LED Indicator Off No internet connection Flashing Service connecting On The signal strength is shown by strength LED indicator (4) Signal LED Indicator Flashing Service abnormal On The battery capacity is shown by strength LED indicator (4) Battery LED Indicator Flashing In charging 2、 Function Introduction： 1. Power on：Press power button for 3 seconds 2. Power off：Press power button for 5 seconds 3. Reset：Press power button for 18 seconds 4. Restore Factory Settings：Press reset button for 5 seconds 5. Battery Capacity and Signal Strength：Press the power button, the battery capacity will be shown in the first 3 seconds, and then the signal strength will be shown afterwards. 3、Local SIM： Both Macro SIM and Micro SIM are supported by E1. ...
- Page 4 • CDMA/EVDO:BC0 BC1 • Max Upload speed:50Mbps • Max Download speed: 150Mbps • Wi‐Fi: IEEE802.11b/g/n • Micro USB • Battery capacity: 3500mAh • Power Input: DC 5V 1A 5、Quick Start Guide 1. Register an Account：Scan the QR code below to download the GlocalMe App. Register an account after installation。 2. Activate Device：Using the GlocalMe App to scan the QR code on the back panel of the device. 3. Purchase Package：Purchase package or top up through GlocalMe App. 4. Power On：Press power button for 3 seconds. 5. Connect to GlocalMe：When the Wi‐Fi LED indicator " " is permanently on, turn on Wi‐Fi on ...
- Page 5 6. Device Management：Input ‘192.168.43.1’ in the address bar of web browser, and input the username and password to login (The initial username and password are shown above). 6、FAQ 1. How long does it take to fully charge the E1? Approximately 7.5 hours. 2. How long can it work continuously? Approximately 12 hours once fully charged. 3. How can I change my Wi‐Fi name and password? Once connected, input ‘192.168.43.1’ in the address bar of web browser, input the new SSID (Wi‐Fi name) and password. 4. What should I do if my device is lost or stolen? De‐activate the device through GlocalMe App to prevent the use of your device. 5. How many connections can it support at the same time? ...
- Page 6 Up to 5 connections is supported by E1 at the same time. 6. How long does it take to connect to the internet once powered on? It depends on the local network condition, normally it will take 1~2 minutes. For the first use in one country, it may take up to 10 minutes. 7. What may be the cause if all the LEDs are off when pressing the power button? It may be caused by low battery, please charge first. 8. What should I do if it stops responding? Press the power button for 30 seconds. 9. What should I do if the local SIM doesn’t work? Manually input the APN of the SIM card (login to 192.168.43.1, go to ‘Settings’ ‐> ‘APN settings’, manually input the APN info of your SIM card and Save.) For more info, please visit www.glocalme.com Warning Specific Absorption Rate (SAR) information.SAR tests are conducted using standard...
- Page 7 measures: --Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment to an outlet on a different circuit to the receiver.--Consult the dealer or an experienced radio/TV technician for help. Disposal and recycling information This symbol (with or without a solid bar) on the device, batteries (if included), and/or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage.
- Page 8 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Environmental Conditions -20 ~ 40 ℃ Working Temperature Working humidity 65+/-20%RH Hereby, HONGKONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED, declares that this 4G Free Roaming Hotspot/ E1, is In compliance with the...
- Page 9 essential Requirements and other relevant provisions of Directive 1999/5/EC. Environment friendly disposal You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipments to an appropriate waste disposal centre. 0700 A warning that batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
- Page 10 Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss The product shall only be connected to a USB interface of version USB2.0 or higher and that the connection to a power USB is prohibited. Adapter shall be installed near the equipment and shall be easily accessible.
Need help?
Do you have a question about the E1 and is the answer not in the manual?
Questions and answers