Related Manuals for Starview ST2020
Summary of Contents for Starview ST2020
- Page 1 Quality Digital Products ST2020 - Twin Tuner www.starview.co.nz NOTE: Please connect the supplied cable between LNB out (loop) and LNB IN 2 if you wish to use the twin tuner capability of the ST2020...
- Page 2 All receivers by Starview have been tested working before leaving our CHCH store. NO TUNING of the ST2020 is required to get the standard Freeview channels as they have been pre-programed for you. You should be able to connect to a satellite dish aligned to the satellite and start enjoying digital TV.
- Page 3 Note: with GMT usage ON the time is set by the satellite. After changing the time you may have to power your ST2012 off. Signal Bars To get signal & quality bars on your ST2020, Press ‘INFO’ button on the remote control. This will bring up the signal and quality bars, Signal with no quality may indicate you are aligned to the wrong satellite.
- Page 4 If you connect to an existing dish and have no pictures you may have a 11300 LNB please refer to front of this guide on how to change this. After a factory default of the ST2020 you may have to put the channels in your prefered order or scan for changes. www.starview.co.nz...
Need help?
Do you have a question about the ST2020 and is the answer not in the manual?
Questions and answers