Table of Contents
Advertisement
Focus Modes
The Easi-View Pro has three different focus modes:
Manual – use the buttons on the base of the Easi-View Pro to focus the image
on the screen. This is the best mode to use when the autofocus cannot focus
automatically, usually because the subject does not have sufficient contrast.
Focus on demand – use the focus button on the base of the Easi-View Pro or click
on the focus icon to automatically to bring the image into focus. This is the best
mode to use when viewing documents.
Continuous – the Easi-View Pro will continuously re-focus as required. This is the
best mode to use when you are using the Easi-View Pro as a web cam
The current focus mode is shown on the base of the Easi-View Pro. An LED will
light to show the focus mode.
Connecting to a PC
Please install the Easi-View Pro software before connecting to the PC for the first
time. Plug the Easi-View Pro into an available USB socket and power the Easi-
View Pro using the external power supply.
The first time Easi-View Pro is connected to the PC; it will automatically locate the
correct drivers.
The PC will recognise the device as a USB Video device and it will appear as a
video device in the Scanners and Cameras section in "My Computer" – Win XP
only.
EASI VIEW PRO MANUAL.indd 5
11/03/2015 15:33
Advertisement
Table of Contents
Need help?
Do you have a question about the Easi-View Pro and is the answer not in the manual?
Questions and answers