Table of Contents
Advertisement
All pins on on the BCD connector are isolated by optocouplers.
You can use either Radio A or Radio B BCD connector on your PG XL.
Other radios
Universally, you can get band data from radios in one of two ways:
A) Getting data from BCD / PTP protocol
Connect your radio or band decoder to the BCD/PTP port on the amplifier.
This connection requires no additional configuration and works automatically.
The BCD/PTP connection has the highest priority, and will ignore other connections if
they exist.
B) Getting data from CAT protocol
Connect your radio to the CAT (RS232) port on the amplifier.
Configure the CAT protocol details using the PG XL Windows app.
3. Turning ON
Place your Power Genius XL on a flat stable surface.
Make sure your Power Genius XL amplifier has at least 30cm of space in front and in the back
to insure adequate cooling.
Follow these steps before powering your Power Genius XL:
▲
Index
11/23
Advertisement
Table of Contents
