Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Lanta Fireblock Hex Batt WIFI
Summary of Contents for Lanta Fireblock Hex Batt WIFI
- Page 1 Owner Handbook Fireblock Hex Batt WIFI ™ Battery Powered 5in1 LED PAR...
- Page 2 This will invalidate your Manufacturer Warranty and may impair the safety features of the product. • All Lanta products designed for indoor use. Under no circumstances must these products be used outdoors unless the product specification specifically defines the product as being water resistant.
-
Page 3: Unpacking And Inspection
Product Quality & Compliance Products from Lanta Lighting meet all required safety standards in force at the time of manufacture and are fully compliant with them. Unpacking & Inspection • Inspect the packaging before opening. If the packaging appears to have sustained significant damage, please take extra care before using the product. - Page 4 Control Gear Lightweight and portable, Lanta Control Gear is robust enough to survive life on the road and smart enough to control DMX kit whatever the venue. Visit us at www.lantalighting.com for more details.
- Page 5 It has a built in colour switching, fading and pattern sequencing facilities and can also be sound activated. A range of features can be DMX controlled from any of the LANTA DMX controllers (or equivalent products) and additionally via a handheld IR remote control.
-
Page 6: Dmx Mode
CHANNEL will be one CHANNEL higher and so on. E.g. if the DMX address has been set to 105, then the Lanta Fireblock Hex Batt WIFI™ will be operated by channels 105 and 106 etc. Fireblock Hex Batt WIFI Owner Handbook™... - Page 7 In most applications, it is sufficient to set the DMX address to 001 as shown in the table overleaf. When the Lanta Fireblock Hex Batt WIFI™ is connected to the DMX controller, each CHANNEL will be controlled by a slider or similar control. When the slider is at the bottom the VALUE is 0.
- Page 8 “Cn01” &” Cn63” can be selected. Press Enter to store. Fireblock Hex Batt WIFI Owner Handbook™ © Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print.
-
Page 9: Auto Mode
Fireblock Hex Batt WIFI Owner Handbook™ © Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. October 16 - Version 2... -
Page 10: Ir Remote Control
Pressing (FL) will active the strobe which can be set to one of three speeds or off. Fireblock Hex Batt WIFI Owner Handbook™ © Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. - Page 11 Fireblock Hex Batt WIFI Owner Handbook™ © Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. October 16 - Version 2...
- Page 12 Should it fail to connect, or you wish to link to a different controller , reset the wireless settings in the Lanta Fireblock Hex Batt WIFI™ by pressing and holding the Wifi Reset button for at least 3 seconds and the green LED goes out. Repeat the link process with the transmitter, the Green LED will flash to indicate communication is being established and then be steady.
-
Page 13: Power Charging
2 months if not in regular use. Fireblock Hex Batt WIFI Owner Handbook™ © Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their respective owners. E&OE. All specifications and details are correct at time of print. October 16 - Version 2... - Page 14 www.lantalighting.com...
Need help?
Do you have a question about the Fireblock Hex Batt WIFI and is the answer not in the manual?
Questions and answers