Table of Contents
Advertisement
PARTS IDENTIFICATION
GRASS
CATCHER
CONTAINERS
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the
tractor, in the operator's position.
THESE ARE THE TOOLS YOU WILL NEED TO AS-
SEMBLE YOUR GRASS CATCHER:
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
•
Depress clutch/brake pedal fully and set parking brake.
•
Place gearshift/motion control lever in neutral (N) position.
•
Place attachment clutch in "DISENGAGED" position.
•
Turn ignition key "OFF" and remove key.
•
Make sure the blade and all moving parts have completely stopped.
•
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact
with plug.
ASSEMBLY
WHEEL WEIGHT
U-BOLT
COVER
UPPER CHUTE
LOWER CHUTE
(1) 3/8" Wrench
(1) 1/2" Wrench
(2) 9/16" Wrenches
(1) 1/2" Socket
(1) 9/16" Deep well Socket
6
DUMP
BAGGER
INDICATOR
CHUTE LATCH
LOWER CHUTE
ATTACHING
WING NUT
(1) Drive Ratchet
(1) 3" or longer Extension
(1) Short Handle
Phillips Screwdriver
Advertisement
Table of Contents
