Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Ambarella NH720
-
Page 1: Installation Guide
Network IR PTZ Camera Installation Guide Ver. 1.1 003C83XZZ1A1... - Page 2 Installation Guide Table of Contents IR PTZ Camera Installation ....................2 Wall Mount ........................2 1.1.1 Mini Pendant Mount ..................2...
-
Page 3: Ir Ptz Camera Installation
Installation Guide IR PTZ Camera Installation In the following section describes camera installation procedures in detail. Wall Mount Network IR PTZ Camera can be mounted on the wall with Mini Pendent Mount. Follow the installation instructions below for mounting Network IR PTZ Camera. 1.1.1 Mini Pendant Mount Package Contents: Mini Pendant... - Page 4 Installation Guide In advance: 1. Insert the nylon spacer to M3x8 screw with spring washer-8 as Fig.1. Fix the screw to the anti-drop chain as Fig.2. (Fig.1) (Fig.2) 2. Open the mounting plate (red frame in Fig.3) Screw the anti-drop chain to the mini pendant mount and insert the chain through the pendant as Fig.4.
- Page 5 Installation Guide STEP 3 Coat the PTFE thread seal tape (not supplied) to the thread of pendant cap around five times for waterproof purpose as Fig 5. Then, thread the Ethernet cable and other cables through the pendant cap and fix the pendant cap to the pendant mount.
- Page 6 Installation Guide STEP 6 Slightly pull the anti-drop chain and other cables into the pendant tube. Then screw the mounting plate back to the mini pendant mount. (Fig.9) (Fig.10) STEP 7 Fix the camera to the mounting kit with the supplied screw and washers.
Need help?
Do you have a question about the NH720 and is the answer not in the manual?
Questions and answers