Page 3
Flashing: Inclusion mode Flashing: Exclusion mode connection, or, not connected Solid: Successful Inclusion Solid: Successful Exclusion to the Building 36 servers Solid: internet connection, connected to the Building 36 servers TIP: To exit Inclusion/Exclusion mode, press the Pairing button ( ).
Page 4
Hub. For your Hub. If you do not have an account, best results, we recommend having the Hub in the contact your Building 36 Professional Partner to same room as the device you are Including. create one for you.
Hub Product Manual | 3 Troubleshooting Step 3: Complete the Installation Excluding Z-Wave Devices (removing them from the network) 1. Once all devices are Included, reconnect the Hub to the network router with the Ethernet To exclude Z-Wave devices, each device must be cable and plug in power supply to the Hub.
Page 6
4 | Hub Product Manual Notices FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital This device complies with part 15 of the FCC device, pursuant to part 15 of the FCC Rules.
Page 7
4 | Hub Product Manual Hub Product Manual | 5 Notices FCC RSS-GEN SEC 7.1.3 NOTICE: This equipment has been tested and found FCC 15.21 NOTICE: IC NOTICE: to comply with the limits for a Class B digital This device complies with Industry Canada The grantee is not responsible for any changes or Under Industry Canada regulations, this radio device, pursuant to part 15 of the FCC...