Advertisement
Working with Apple (iOS)
Step 6
In order for the WiFi settings
to be pushed to the camera,
you will now need to switch the
WiFi network to the GoVideo-
AP network. To do this, go to
the iOS Settings page and
select
10
Step 7
Locate the GoVideoAP WiFi
network and select it to connect to
it. Once connected to the GoVideo
Ap WiFi network
the GoVideo
App.
WiFi.
Note: The GoVideoAP WiFi network
will not require a password to connect.
Step 8
Once you have navigated back to
the GoVideo App,
select the Next
button to connect the camera to
navigate back to
the WiFi network.
Note: If your first try fails to connect
the camera, please wait 30 seconds
and try again. Some customer's rout-
ers require 30 seconds before this
step can be completed.
Note: If the WiFi password is incor-
rect the camera will not be connected
to the WiFi network and you will not
see live video stream. If you do not
see live video stream after five min-
utes, please press and hold the reset
button for 3 seconds and return to
Step 1 (see diagram on page 5).
Step 9
The camera will now be added
to the WiFi network. Please
wait 5 minutes for the camera
to reboot and then check the
live video stream.
11
Advertisement
