Summary of Contents for Maxfor MFG-G400
- Page 1 MAXFOR Technology Inc. MAXFOR Technology 48, Banjeong-ro, Yangji-myeon, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Smart Gateway (MFG-G400) User’s Manual MAXFOR Technology Inc. ㈜ 맥 스 포 MQEP-22-04 ( 1 / 10 ) R.0 A4(210×297mm)
-
Page 2: Table Of Contents
Notice ..................................... 4 Introduction ................................. 5 Features ..................................5 Specification ................................5 Designation .................................. 7 Remote access method to MFG-G400 ......................8 7.1 Access method to VNC Viewer ........................8 Installation ................................... 9 Maintenance ................................9 Contact information ............................9 ㈜... -
Page 3: Symbol Description And Definition
MAXFOR Technology Inc. MAXFOR Technology 48, Banjeong-ro, Yangji-myeon, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea 1. Symbol Description and Definition WARNING Warning messages address situations that could result in injury or critical damage to the Gateway. CAUTION Caution messages address situations that could result in damage to the Gateway. -
Page 4: Notice
▷MAXFOR Technology Inc. will not be held responsible for any damages such as physical damages occurred on users, if the cause is the inappropriate use of the product against the manual description. ▷MAXFOR Technology Inc. does not appoint any agency or men, the legal rights to represent the company regarding our business. -
Page 5: Introduction
MAXFOR Technology 48, Banjeong-ro, Yangji-myeon, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea 3. Introduction The MFG-G400 is functions as a gateway to transmit data to server without going through PC being collected data from wireless sensor network. 4. Features Ubiquitous Sensor Network Gateway SAMAUNG S3C6410 (ARM core) 633MHz chip. - Page 6 MAXFOR Technology Inc. MAXFOR Technology 48, Banjeong-ro, Yangji-myeon, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea RF power -55dBm - 8dBm Boost mode Sensitivity -102dBm Receive sensitivity Antenna Dipole Antenna System Operation Operating -20°C - 50°C Temperature Range Storage -20°C - 50°C Humidity Range...
-
Page 7: Designation
MAXFOR Technology Inc. MAXFOR Technology 48, Banjeong-ro, Yangji-myeon, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea 6. Designation Description LED ( Power, STATE, LINK, Tx, Rx) ANTENNA(Dipole antenna) Magnetic key 4.3 inch LCD Power & Eternet Hole ㈜ 맥 스 포 MQEP-22-04 ( 7 / 10 ) R.0... -
Page 8: Remote Access Method To Mfg-G400
48, Banjeong-ro, Yangji-myeon, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea 7. Remote access method to MFG-G400 - Remote access is used to confirm only sensor data and Set values is used to Default values. If you change the setting, remote VNC connection and data linkage can be a problem. -
Page 9: Installation
MAXFOR Technology Inc. MAXFOR Technology 48, Banjeong-ro, Yangji-myeon, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea 8. Installation - Locate the Gateway in an area easily accessible by a technician. - Avoid locations in which the Gateway will be subjected to vibration or rapid temperature fluctuations. - Page 10 MAXFOR Technology Inc. MAXFOR Technology 48, Banjeong-ro, Yangji-myeon, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea FCC Part 15.105 statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Need help?
Do you have a question about the MFG-G400 and is the answer not in the manual?
Questions and answers