Sony CFD-S40CP Service Manual page 5

Basic Operations
Playing an audio CD or MP3 files
3
Connect the supplied AC power cord (see page 23).
1
Press Z PUSH OPEN/CLOSE down
to open the CD compartment and
place the CD on the CD
PUSH
compartment.
OPEN/CLOSE
2
Close the lid of the CD compartment.
PUSH
OPEN/CLOSE
3
Press u (N on the remote).
CD
The player turns on (direct power-on)
and the player plays all the tracks
once.
To play a disc with MP3 files, see
page 6.
4
Playing an audio CD or MP3 files (continued)
Playing a disc with MP3 files
Note
Before playing a file, this
player reads all file and
folder information on the
disc. Depending on the
1
Press Z PUSH OPEN/CLOSE down to open the CD
file structure, it may take
compartment and place the CD on the CD compartment
more than a minute to
(see page 4) .
read them. During this
time, TOC READING
2
is displayed.
Close the lid of the CD compartment.
Tip
3
Press u (N on the remote).
You can use the buttons
The player turns on and the player plays all files of a disc
mentioned on page 5 for
(TRACK mode).
additional operations in
When you use a disc with MP3 files, the MP3 indicator
the same way as playing
an audio CD. lights up.
Track number
Playing a specific file (FOLDER mode)
Press FOLDER/TRACK during stop to display
display, and turn the jog dial to select the folder you want to
play, then press u.
Folder number
To go to the next track / go back to the previous
track in the selected folder
During play
During stop
6
1, 2
With the label side up
Display
Track Playing
number time
Z PUSH
OPEN/CLOSE
u
Jog dial
FOLDER/TRACK
MP3 indicator
M, m
After the file name is displayed,
the playing time will appear
in the
After the folder name is displayed,
the playing time will appear
Turn the jog dial.
(Press > or . on the remote)
Press M or m.
(Press TUNE + or - on the remote)
Use these buttons for additional operations
Tip
To
Playback starts from the
adjust the volume
track you last stopped
playing (Resume play).
During stop, the track
stop playback
number to be played are
pause playback
displayed.
To cancel the resume play
to start play from the
beginning of the first track,
go to the next track
press x in stop mode.
go back to the previous track Turn the jog dial counterclockwise.
remove the CD*
turn on/off the player
*Once you open the CD compartment, the track to start play will
change to the beginning of the first track.
Example of folder structure and playing
order
The playing order of the folders and files is as follows:
CD-R
CD-RW
1
Notes
¥ A folder that does not
include an MP3 file is
skipped.
¥ Maximum folder number:
255
Maximum file number: 255
¥ Folder names and file
names can be displayed
with up to 8 characters.
¥ The characters A - Z,
0 - 9, and _ can be
displayed on this player.
Other characters are
displayed as - .
¥ The file name does not
correspond to the ID tag.
Track mode
Folder mode
CFD-S40CP
POWER
Z PUSH
OPEN/CLOSE
VOLUME +, –
u
Jog dial
x
Do this
Press VOLUME +, —
(VOL +, — on the remote).
Press x .
Press u (X on the remote).
Press the button again to
resume play after pause.
Turn the jog dial clockwise.
(On the remote, press >.)
(On the remote, press ..)
Press Z PUSH OPEN/CLOSE.
Press POWER.
continued
5
Folder
MP3 file
1
2
3 4
4
5
6
5 7
8
9
6
q;
2
3
Playing all MP3 files from 1, 2, 3...9, 0
Playing all MP3 files in the selected folder.
(Example: If you select folder 3, the player
plays file 4. If you select folder 4, the player
plays file 5 and 6.)
7
5