This provision shall not apply for software subject to the General Public License (GPL) or other free open source licenses. Omnium1 and the Omnium1 logo are trademarks of Swiss Bionic Solutions Holding GmbH. All other trademarks are the property of the corresponding holders.
1. Plug the power supply into the tablet’s power connection. 2. Plug the power supply into the wall socket. The Omnium1 display will show a picture indicating that the device is being charged. 3. Once the battery has been completely charged, disconnect the power sup-...
Once the memory card is properly posi- tioned, it will lock into place instead of being ejected. Once the Omnium1 has been switched on, you can use the on/off button to To remove the memory card, press it into the device until the spring releases activate the power-saving mode or return to standard mode.
7. Working with the Screen 8. Using the Operating Buttons Your Omnium1 has been equipped with a touch-sensitive (capacitive) mul- App Menu Button Opens the app menu. ti-touch touchscreen, so a simple touch (without any pressure) is sufficient for There, you will find a number of pre-instal- running your commands. There are a number of options for controlling the led apps.
11. Connecting to the Internet Turning the Omnium1 from horizontal to vertical or vice versa will change the To surf the Internet or send email messages with your Omnium1, you must be screen orientation. Most apps will automatically adjust their screen content.
12. Security Features for Airplanes 13. Declaration of Conformity Ask the airline personnel if you can use your Omnium1 on board. The use of Swiss Bionic Solutions Holding GmbH hereby declares that the Omnium1 pro- electronic devices is limited by most airlines. Most airlines only allow the use duct complies with the following standards: of electronic devices during the flight, but not during take-offs and landings.
Page 9
Swiss Bionic Solutions Schweiz GmbH Bodenackerstrasse 69 | 4657 Dulliken, Schweiz This equipment has been tested and found to comply with the limits for a Class Phone: +41 (62) 295 5951 | Fax: +41 (62) 295 5952 B digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the Omnium1 and is the answer not in the manual?
Questions and answers