Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Digital China Networks WL8200-I2
- Page 1 Wireless Access Point Installation Manual Manual Version: v1.0...
-
Page 2: Table Of Contents
Wireless Access Point Installation Manual Content Content Chapter 1 Device Introduction ..........1-1 Chapter 2 Preparation for Installation ........2-1 2.1 Installation Precautions ..............2-1 2.2 Installation Environment Requirements ........2-2 2.3 Equipment Accessories ..............2-2 2.4 Installation Tools ................2-2 Chapter 3 AP Installation ............ -
Page 3: Chapter 1 Device Introduction
5GHz. It can provide higher bandwidth and cover wider range. The uplink of this AP adopts the 1000Mb Ethernet port which supports PoE power. It expands the bandwidth. This series AP includes two products: WL8200-I2 is the 2X2 AP. Fig 1-1 WL8200 Series... - Page 4 Wireless Access Point Installation Manual Chapter 1 Device Introduction The shape size and weight of WL8200 series indoor AP is as below: Table 1-2 the shape size and weight Shape Size Weight Product Model WL8200 series（W×D×H） 183 x 150 x 42 mm 0.5kg...
-
Page 5: Chapter 2 Preparation For Installation
Wireless Access Point Installation Manual Chapter 2 Preparation for Installation Chapter 2 Preparation for Installation 2.1 Installation Precautions Only allow the professionals installing and disassembling the device and its annex. Before the installation and configuration, please read the related security introduction carefully. -
Page 6: Installation Environment Requirements
Wireless Access Point Installation Manual Chapter 2 Preparation for Installation ---Consult the dealer or an experienced radio/TV technician for help. 2.2 Installation Environment Requirements Before the installation, please check the installation conditions of the device to make sure that the device is in the good operating environment in a long time. Check this with the following aspects. -
Page 7: Chapter 3 Ap Installation
Wireless Access Point Installation Manual Chapter 3 AP Installation Chapter 3 AP Installation Because the installation position of WL8200 series indoor AP is high normally, the maintenance personal cannot maintain and debug through the console port to login the device after installation. We suggest user conducting the basic configuration according to need before installing the AP to the appointed position. -
Page 8: Checking Before Installation
Wireless Access Point Installation Manual Chapter 3 AP Installation 3.2 Checking before Installation Please check the following items before the AP installation: Please power to the AP first and connect the AP to the Ethernet, then check the LED status to make sure the AP can work normally. ... -
Page 9: T-Keel Installation
Wireless Access Point Installation Manual Chapter 3 AP Installation Fig 3-2 wall mounting screws When installed with wall hanging method, please connect the Ethernet cable to the AP first and then install the AP on the wall mounting bracket. (1) Connect the AP to the wired LAN by using the cable (2) Mark the positions of two holes on the wall and the distance between them is 65 mm. - Page 10 Wireless Access Point Installation Manual Chapter 3 AP Installation 1. The width of T-keel is from 12mm to 30mm. 2. This installation method is only applied to the T-keel but not the other kinds of keels. The T-keel mounting kit includes two plastic mounting kits and two fixing screws, and they can be found in the accessory bag.
-
Page 11: Connect Ap Power
Wireless Access Point Installation Manual Chapter 3 AP Installation Fig 3-6 Fix the AP on the T-keel Step 3: Whirl the AP by counterclockwise and closing to the T-keel to make the two diagonal slots of the mounting kit buckle the T-keel. At the same time, the two elastic stoppers on the mounting kit buckle the T-keel for locking. -
Page 12: Local Power
Wireless Access Point Installation Manual Chapter 3 AP Installation User can use the Ethernet cable to connect the Ethernet interface of the AP and the switch which supports PoE function to power to the AP. WL8200 series adopts the 802.3af/802.3at PoE power supply. When the USB is not used, it adopts the 802.3af PoE power supply;... -
Page 13: Connect Ap To Internet
Wireless Access Point Installation Manual Chapter 3 AP Installation 3.6 Connect AP to Internet In the actual use, AP can be uplink connected to the Internet or MAN through the Ethernet port. Connect the Ethernet port of the AP to the switch port to achieve the uplink connection.
Need help?
Do you have a question about the WL8200-I2 and is the answer not in the manual?
Questions and answers