Table of Contents
Advertisement
Association control
Control table
a client is denied to connect to this device, it means the client
can't access to the Internet either. Choose "allow" or "deny"
to allow or deny the clients, whose MAC addresses are not in
the "Control table" (please see below), to connect to this
device.
Check "Association control" to enable the controlling of
which wireless client can associate to the wireless LAN. If a
client is denied to associate to the wireless LAN, it means the
client can't send or receive any data via this device. Choose
"allow" or "deny" to allow or deny the clients, whose MAC
addresses are not in the "Control table", to associate to the
wireless LAN.
"Control table" is the table at the bottom of the "MAC
Address Control" page. Each row of this table indicates the
MAC address and the expected IP address mapping of a client.
There are four columns in this table:
MAC Address MAC address indicates a specific client.
IP Address
C
A
-21-
Expected IP address of the corresponding
client. Keep it empty if you don't care its
IP address.
When "Connection control" is checked,
check "C" will allow the corresponding
client to connect to this device.
When "Association control" is checked,
check "A" will allow the corresponding
client to associate to the wireless LAN.
Advertisement
Table of Contents
