Upgrading Memory; Replacing The Memory - Samsung NC10 User Manual

Upgrading Memory

A memory is installed in the memory slot at the bottom of this computer. The
procedures to replace the memory are described below.
Replace new memory only after shutting the computer down completely. Do not
replace memory when the computer is in Sleep mode.
Disconnect mains power and remove the battery before continuing.

Replacing the Memory

1
Remove the screw on the memory
compartment cover at the bottom of
the computer using a screw driver.
Fixing Screw
2
Pull the memory module latches
outward.The memory module will pop
up.
Remove the memory module out at
an angle of 30 degrees.