Download Print this page

Uni-Art Precise Products SP1490 User Manual

900mhz digital hybrid wireless outdoor speakers system

Advertisement

Quick Links

SP1490
900MHz Digital Hybrid Wireless Outdoor
Speakers System
User's Manual
Please read before using the equipment

Advertisement

loading

Summary of Contents for Uni-Art Precise Products SP1490

  • Page 1 SP1490 900MHz Digital Hybrid Wireless Outdoor Speakers System User’s Manual Please read before using the equipment...
  • Page 2 INTRODUCTION This 900 MHz wireless speaker system uses latest wireless technology that enables you to enjoy music and TV sound anywhere inside or outside your home. You can simply connect the system to any audio source such as Radio, TV, VCR, Hi-Fi and CD/MP3/VCD/DVD player.
  • Page 3: Component Identification

    COMPONENT IDENTIFICATION TRANSMITTER SPEAKER RECEIVERS...
  • Page 4: Installation

    INSTALLATION TRANSMITTER 1. Insert the antenna tube into the antenna wire. 2. Connect the supplied AC/DC power adaptor to an electrical wall outlet. 3. Plug the AC/DC power adaptor in the DC jack located on the rear of the transmitter. 4.
  • Page 5: Operation

    2. Press POWER button and turn the speakers ON. The POWER LED will light up in blue. Switch off the speakers by pressing the POWER button on the speaker, and the LED will be off. OPERATION 1. Turn on the audio source (TV or audio component) to which the transmitter is connected with.
  • Page 6 b) Whenever you find frequency jam, move your channel switch from one channel to the other channel (there are two channels for selection) on the transmitter, and then press the “AUTO TUNE” button again. 5. You should now be able to place the speakers freely from room to room without disruption.
  • Page 7 6. Switching Off a) For protection of the transmitter and power saving, the transmitter will cut off automatically if there is no/weak operation input signal from audio source for 4 minutes. In other words, if the signal comes back, the transmitter will work again automatically.
  • Page 8: Technical Specifications

    TECHNICAL SPECIFICATIONS Transmission Mode Carrier Frequency 900 MHz Operation Voltage Transmitter, DC 12V 200mA Speaker, 6 X ‘AA’ size Alkaline batteries or DC 12V 1A adaptor Frequency Response 40Hz – 12KHz Distortion S/N Ratio 65dB (typical) Channel Separation 50dB (typical) Operation Distance Up to 150 feet Output Power...