Download Print this page

BARDL UHF SF-318 Instructions For Use Manual

Ultra high frequency cpu-controlled dualantenna diversity receiver

Advertisement

Quick Links

WIRELESS MICROPHONE SYSTEM
ULTRA HIGH FREQUENCY
CPU-CONTROLLED DUAL-
SF-318
ANTENNA DIVERSITY
RECEIVER

Instructions For Use

WIRELESS MICROPHONE SYSTEM

Advertisement

loading

Summary of Contents for BARDL UHF SF-318

  • Page 1: Instructions For Use

    WIRELESS MICROPHONE SYSTEM ULTRA HIGH FREQUENCY CPU-CONTROLLED DUAL- SF-318 ANTENNA DIVERSITY RECEIVER Instructions For Use WIRELESS MICROPHONE SYSTEM...
  • Page 2: Product Introduction

    Thank you for using BARDL's product. Please read the user manual carefully before you 2 SYSTEMS'S ACCESSORY INSTRUCTION operate the wireless microphone. (1) SF-318receiver 1. PRODUCT INTRODUCTION (2) POWER UHF SF-318 professional wireless microphone is designed in UHF, dual CPU control, PLL (3) 1/4inch connect cable synthesized and signals testing.
  • Page 3: Installation

    3.INSTALLATION a: Change the battery (1) SF-318 Receiver 13 14 15 1. Infrared ray transmitter 2. LCD screen 3. UP key 4. Down Key 5. SET key 6. Infrared ray transmitter setting button 7. Power 8. Antenna B connector 9. Volume button to adjust the volume 10.
  • Page 4 (3) Clip style microphone 4 OPERATION METHOD OF MANUAL 1. antenna (1) LCD panel of the receiver 2. power 3. low electrical voltage indicate light 4. infrared ray data receiving indicate light 5. radio input 3 pin connector DATA 6. infrared ray data receiving window 7.
  • Page 5 SQUELC Unlock setting: mute:(only in receiver) A. Depress SET, it will indicate "LOC", and then "LOC ON". SQ is controlled by CPU, which is convenient to adjust the mute sensitivity of receiver. B. Depress UP ,it will indicate "LOC OFF",and then shining. Shielding all the microphone signal and any other interferential signal so that it can avoid C.
  • Page 6 Adjust each system as above 5. MALFUNCTION AND MAINTENANCE >Notice:when adjust one system, only reveal it's infrared ray transmitter window. Malfunction Indicating Solving method Turn on the transmitter power to check the Receiver signal indicating battery make sure the polarity is right, if there is not lighting are something wrong,change it Receive signal indicating...
  • Page 7: Technical Data

    6. TECHNICAL DATA (1). General features: Working frequency: 684.7MHz Adjusting: FM Frequency response: 50Hz~15Hz Distortion: 95dB Working distance: 100M (without disturbance) Working temperature: 5celsius~45celsius (2). Handle style transmitter RF transmit power: 3.54mW Transmitting stable frequency: within 30ppm Dynamic range:*100dB, A-weighing Frequency response:50Hz~15KHz Maximum output voice:130dB SPL Element:...