EverNew PT Installation Instructions Manual

Composite decking

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Composite

Decking

EverNew

PT composite decking is installed with

the same skills and tools as natural wood, but

there are some small yet important differences

that must be maintained. Familiarize yourself

before installation.

HELPFUL HINTS

Read end tag labels on product and these

instructions thoroughly before beginning

the assembly.

• Use carbide-tipped multi-purpose blade

for cutting (minimum of 40 tooth blade

recommended).

• Do not lay composite components

on abrasive surfaces.

• If any components are missing

or defective, please call us at:

800-380-5323.

I M P O R T A N T :

l w a y s w e a r s a f e t y

g l a s s e s w h e n C u t t i n g a n d

d r i l l i n g d e C k i n g p r o d u C t s

S T E P - B Y - S T E P

Virtually maintenance free | 25-year performance warranty

TOOLS REQUIRED

EverNew PT composite decking is easily

installed with the same tools used for

lumber. Carbide-tipped blades and bits are

recommended for best results.

TIP

Make sure you have all the pieces

you need to complete the job.

IMPORTANT

DECKING STORAGE

PRIOR TO INSTALLATION

Prior to installation material should

be stored on a flat surface, supported

every 24" and covered if original

packaging is removed.

nstallation

nstruCtions for

ver

oMposite

efore

eCking

egin

RECOMMENDED APPLICATIONS

EverNew PT composite decking is intended for

residential installations on sun decks, pool decks,

docks, boardwalks, ocean walks and similar

applications. CertainTeed cannot anticipate every

possible installation and recommends that you

consult an engineer, architect and/or building code

official in your area to make sure that your design

meets all locally applicable codes.

Note: EverNew PT deck boards are reversible.

Important: EverNew PT composite decking

must be installed on structural deck framing and

properly gapped to allow for expansion, contraction

and drainage. Do not attach planks directly to

any solid surface or water-tight system such as

sheathing, waterproof membranes, concrete, roof

systems or patios. A minimum of six inches of

continuous net free area under the deck surface

is required for adequate ventilation on all decking

applications. Install porch and deck material so

air can circulate between adjacent members, to

promote drainage and drying. Failure to follow

these requirements voids warranty.

Note on Static: Dry and windy environments may create a

temporary condition of static electricity, which

will vary depending on climate and age of deck.

Note for optimum decking appearance:

When dealing with butt joints or multi-chromatic

colors, it is suggested you lay out or "rack" 10 or

so rows of decking boards across the joists so that

you can ensure butt joints are properly staggered

and color variations are either randomly dispersed

throughout or arranged in the desired pattern.

Racking not only allows you to preview how the

deck will look installed, but it also provides easy

access to decking boards as you work.

Table of Contents

Need help?

Do you have a question about the PT and is the answer not in the manual?

Questions and answers

Summary of Contents for EverNew PT

Page 1 TOOLS REQUIRED RECOMMENDED APPLICATIONS before installation. EverNew PT composite decking is easily EverNew PT composite decking is intended for installed with the same tools used for residential installations on sun decks, pool decks, HELPFUL HINTS lumber. Carbide-tipped blades and bits are docks, boardwalks, ocean walks and similar recommended for best results.
Page 2 • Aid in the removal of organic debris. may have specific framing and support • Meet board spacing requirements of the requirements for their warranty purposes. EverNew warranty. 12” o.c. Figure D 1/4” Gap Deck...
Page 3 Figure I allow perpendicular EverNew PT decking and will likely result in For a cleaner look, stainless installation of surface mushrooming. Other fasteners not specifically steel screws with small casing or finish fasteners (Figure H).
Page 4 WOOD GRAIN PATTERNS Note that the graining on EverNew PT EverNew PT requires two fasteners at every decking is directional. Different looks can be joist location (Figure L). While face fastening is Joists Joist 2x8 achieved by laying the decking in the same or allowed on all EverNew decking products, the alternating directions (Figure J).
Page 5 are and aintenanCe IMPORTANT CONSIDERATIONS • Ensure minimum 6" of ventilation under Ventilation Masonry Construction the deck and required spacing between Make sure there is adequate and unobstructed air Masonry construction performed on the surface decking boards. flow under the deck to prevent excessive water of the decking material will cause a haze from absorption.
Page 6 IMPORTANT CONSIDERATIONS (CONT.) To thrive, mold and mildew need air, water, Dirt and Grime Salt and Calcium Chloride elevated temperatures and a food source. There Dislodge accumulated dirt with a broom or by Build up of salt and calcium chloride from snow is no way to eliminate all these conditions in the using soap and water and a non-metal scrub and ice removal is easily removed with enough...